Cornelius SID851A/250S-BC, SID851W/250S-BC instruction

IMPORTANT: To ensure proper ice maker operation and also to reduce the frequency of water-related service problems, a water filter should be installed. Remcor recommends the use of one of the following basic systems:

1. Everpure, Inc.	2. System IV
660 No. Blackhawk Drive	16632 Burke Lane
Westmont, IL 60559	Huntington Beach, CA 92647
(708) 654-4000	(714) 842-4221
Insurlce Twin System #9320-42	Basic Water System #B1000

For specific recommendations on these filter systems for your local conditions, consult with a distributor in your area or contact the filter manufacturer.

Models SID851/250S & SID851/250S-B

Connect two (2) 3/4?IPS (or equal) drain lines to the 3/4?threaded drain connections at the lower rear of the unit. These lines must pitch downward to an open drain and must contain no traps or improper drainage will result.

Model SID851/250S-BC

A 1?OD tubing drain elbow is provided at the bottom of the unit for the sink drain. Connect this elbow to a 7/8? ID plastic drain tube.

A 3/4?IPS threaded drain connection for the ice maker is also provided at the bottom of the unit. Connect this to a 3/4?IPS drain line (or equal).

These lines must pitch downward to an open drain and must contain no traps or improper drainage will result.

NOTE: In areas where consistently warm water temperatures are encountered, the use of a Remcor Pre- Cooler in the water line is recommended to maximize the ice production of this unit. Contact Remcor for more information on this product.

2.Electrical

A 4 x 2 junction box is located at the rear of the unit for the supply hook-up. Connect the ice maker to its own circuit per the national electric code and local code. See SPECIFICATIONS for ampacity and fuse size.

IMPORTANT: The wire size must be adequate for the ampacity rating, and the supply voltage must be within a range of ± 10% for proper ice maker operation.

NOTE: The units require a 3 wire system plus earth ground for proper operations.

115/208-230V

1 PHASE

60 HERTZ

BLACK (HOT)

RED (HOT)

WHITE (NEUTRAL)

SUPPLY CONDUIT

GREEN (GROUND)

FIGURE 1. ELECTRICAL WIRING INSTALLATION INSTRUCTIONS

90914

SID851W/250S-BC, SID851W/250S-B, SID851W/250S, SID851A/250S-BC, SID851A/250S-B specifications

The Cornelius SID851 series, including models SID851A/250S, SID851A/250S-B, SID851A/250S-BC, SID851W/250S, and SID851W/250S-B, stands at the forefront of beverage dispensing technology. Designed for both efficiency and versatility, these units are ideal for various commercial applications, from restaurants and bars to event catering and convenience stores.

One of the defining features of the SID851 series is its robust construction. These models are built to endure the rigors of high-demand environments, with durable materials that are both corrosion-resistant and easy to clean. This ensures long-term reliability and minimal downtime, crucial factors for businesses that serve high volumes of beverages.

The SID851 models are equipped with advanced cooling technologies, making them proficient in maintaining optimal beverage temperatures. The models utilize a state-of-the-art refrigeration system that ensures quick cooling and consistent temperature control. This feature is essential for preserving beverage quality, particularly for carbonated drinks that require specific serving conditions.

Each unit supports multiple beverage types, providing flexibility in service. The SID851A models, for instance, can easily transition between different drink options, allowing users to switch from sodas to mixed drinks without hassle. This versatility is enhanced by user-friendly interfaces that enable quick selection and adjustments.

Energy efficiency is another hallmark of the SID851 series. Designed with modern energy-saving technologies, these models not only reduce operational costs but also contribute to environmentally sustainable practices, making them ideal for businesses conscious of their ecological footprint.

The SID851W models offer an advanced wireless communication feature, allowing for seamless integration with point-of-sale systems. This smart technology facilitates real-time monitoring of beverage inventory and dispensing metrics, empowering business owners to make informed decisions based on data analytics.

Safety is paramount in the SID851 designs, featuring automated shut-off mechanisms to prevent overflows and spills. Additionally, the ergonomic design of the dispensing interfaces minimizes user strain, promoting a comfortable and safe working environment.

Overall, the Cornelius SID851 series represents a blend of innovation, durability, and efficiency, making them top choices for any beverage service operation. By investing in these models, businesses can enhance their service capabilities while ensuring that customer satisfaction remains a top priority.