Cornelius QUANTUM SERIES Concentrate Loading and Brixing, Changing Concentrate Flavor

Page 7

Quantum Series Installation and Service Manual

CONCENTRATE

LOADING AND BRIXING

PLACING CONCENTRATE PRODUCTS ON DISPENSING PLATFORM

To engage the concentrate container, place it in the desired position and press down into bottle adapter opening on dispensing platform tray (inside the cabinet).

NOTE: Make sure o-ring seal on the container adapter is lubricated; otherwise, you may experience difficulties with container replacement.

NOTE: Concentrate in the containers must be completely thawed and be within the temperature range of 35°F - 40°F (1.6°C - 4.4°C). Failing to supply concentrate inside the recommended temperature range, especially below 35°F (1.6°C), will cause an out of brix drink.

It is recommended the concentrate be thawed in a refrigerated (35°F - 40°F) (1.6°C - 4.4°C) com- partment for 36 to 48 hours before use.

It is recommended that the thawed concentrate be thoroughly shaken before use.

CHANGING CONCENTRATE FLAVOR

1.Perform flush cycle

2.Move valve handle to “Dispense” position

3.Replace concentrate container

PUMP PRIMING

1.Follow instructions in paragraph “Placing Concentrate Products on the Dispensing Platform”

2.Close the door (or unit will not activate)

3.Depress the push button until concentrate appears at the dispensing nozzle.

BRIX SETTING

1.Make two (2) full clockwise turns of the corresponding brix knob from the “all the way out” po- sition (factory set). These two turns will bring you within one turn of proper brix setting. (Refer to brix table located on the inside of the refrigerated compartment door).

2.Dispense 1/2 cup of juice and discard.

3.Dispense 1/2 cup of juice and use refractometer to check brix level.

4.Clockwise rotation of the knob decreases brix level for example from 13% to 11.5%. Counter- clockwise will increase brix level for example from 11.5% to 13%.

If a brix problem is experienced, refer to troubleshooting guide.

- 5 -

720901120

Image 7
Contents Quantum Series Table of Contents Unit Specifications Counter Location PreinstallationReceiving UnpackingInstallation Specifications Flushing and Sanitizing on Start UP CANCEL/POUR ButtonProgramming Portion Control Optional Changing Concentrate Flavor Brix SettingConcentrate Loading and Brixing Placing Concentrate Products on Dispensing PlatformDaily Part Washing Cleaning Sanitizing ProceduresDaily System Flush Procedure Weekly Sanitizing ProcedureSEMI-ANNUAL General Cleaning Weekly Check Brix SettingYearly Replace Pump Tubing Replacement of Pump Hose see figure 720901120 720901120 Probable Cause TROUBLE-SHOOTING GuidePage Page Refer to Concentrate Loading sec- tion of this manual Page Page Page Page IMI Cornelius Inc One Cornelius Place Anoka, MN Quantum Series Juice Dispenser Model no Quantum Series Juice Dispenser Name Refrigeration and Frame Assembly Quantum Series Juice Dispenser See Figure Upper Cabinet Assembly Upper Cabinet Asy Platform Assembly Tube Asy Discharge 2000 Valve Block Assembly Bottle Adapter Assembly Rear Door Assembly Door Cover Assembly Electrical BOX DC Assembly Electrical BOX AC Assembly Voltage Regulator Assembly

QUANTUM SERIES specifications

The Cornelius Quantum Series represents a cutting-edge line of beverage dispensing systems that cater to a variety of commercial sectors, from cafes and restaurants to large foodservice venues. Built on innovative technology and designed with user convenience in mind, the Quantum Series is a game-changer for the beverage service industry.

One of the standout features of the Quantum Series is its modular design. This allows operators to customize the system according to their specific requirements. By incorporating multiple flavors in a single unit, establishments can streamline their beverage offerings without sacrificing quality or variety. The modularity not only saves space but also enhances operational efficiency.

In terms of technology, the Quantum Series leverages advanced touch screen interfaces, which are intuitive and user-friendly. These interfaces provide easy access to a plethora of beverage options, enabling staff to quickly select and serve drinks. This technological integration reduces wait times for customers, significantly enhancing the overall service experience.

Moreover, the Quantum Series utilizes state-of-the-art refrigeration technology that ensures optimal beverage quality. By maintaining precise temperature controls, the system helps preserve the freshness and flavor of beverages, which is essential for both carbonated drinks and specialty coffees. This feature not only contributes to better taste but also minimizes waste associated with beverage spoilage.

The Quantum Series is also equipped with smart connectivity features. With IoT-enabled capabilities, operators can monitor their system remotely, track usage patterns, and analyze data. This connectivity allows for proactive maintenance, ensuring that the machine operates at peak efficiency while minimizing downtime.

Additionally, the Quantum Series emphasizes sustainability. Many models are designed to reduce energy consumption, allowing establishments to lower their carbon footprint. This eco-friendly approach aligns well with the growing emphasis on sustainability in the foodservice industry.

In conclusion, the Cornelius Quantum Series stands out for its innovative modular design, advanced touchscreen technology, precise refrigeration, smart connectivity, and commitment to sustainability. These features collectively empower businesses to deliver high-quality beverages efficiently and sustainably, making it an ideal choice for modern beverage service environments. As the demand for multifunctional and reliable beverage systems grows, the Quantum Series is poised to remain at the forefront of industry innovation.