Cornelius Enduro-200/250 installation manual Troubleshooting

Page 15

TROUBLESHOOTING

IMPORTANT: Only qualified personnel should service internal components or electrical wiring.

WARNING: If repairs are to be made to a product system, remove quick disconnects from the applicable product tank, then relieve the system pressure before proceeding. If repairs are to be made to the CO2 system, stop dispensing, shut off the CO2 supply, then relieve the

system pressure before proceeding. If repairs are to be made to the refrigeration system, make sure electrical power is disconnected from the unit.

Should your unit fail to operate properly, check that there is power to the unit and that the hopper con- tains ice. If the unit does not dispense, check the following chart under the appropriate symptoms to aid in locating the defect.

Trouble

Probable Cause

BLOWN FUSE OR CIRCUIT BREAKER.

A. Short circuit in wiring.

 

B. Defective gate solenoid.

 

C.Defective agitator motor.

 

 

GATE DOES NOT OPEN. AGITATOR DOES NOT TURN.

A. No power.

B. Bent depressor plate (does not actuate switch). C.Defective dispensing switch.

GATE DOES NOT OPEN OR IS SLUGGISH.

A. Defective gate solenoid.

AGITATOR TURNS.

 

 

B. Excessive pressure against gate slide.

 

C.Defective Rectifier.

 

 

ICE DISPENSES CONTINUOUSLY.

A. Stuck or bent depressor plate (does not release

 

switch).

 

B. Defective dispensing switch.

 

C.Improper switch installation.

 

 

SLUSHY ICE. WATER IN HOPPER.

A. Blocked drain.

 

B. Unit not level.

 

C.Poor ice quality due to water quality or icemaker

 

problems.

 

D.Improper use of flaked ice.

 

 

BEVERAGES DO NOT DISPENSE.

A. No 24 volt power to faucets.

 

B. No CO2 pressure.

BEVERAGES TOO SWEET.

A. Carbonator not working.

 

B. No CO2 pressure in carbonator.

 

C.Faucet brix requires adjusting.

 

 

13

92181INS

Page 14 Page 16
Image 15
Page 14 Page 16
Contents This Document Contains Important Information To the InstallerTable of Contents Description Safety PrecautionsInstallation Instructions LEG OptionCounter Mounting Gate Restrictor Plate Adjustment Gate Restrictor Plate Unit With SIX Faucets Flow DiagramEight Carbonator CO2Faucets TEN Unit withFlow Diagram B Unit with Wiring Diagram Schematic 115 Volt Unit Wiring Diagram 220-240 Volt Unit Wiring DiagramSchematic 220-240 Volt Unit Troubleshooting Flavor Syrups do not Dispense Beverage not Sweet EnoughBeverages not Cold Units with BUILT-IN Cold PlateWarranty

Enduro-200/250 specifications

The Cornelius Enduro-200/250 is a cutting-edge off-road motorcycle designed for enthusiasts who crave adventure and versatility. Engineered for both novice riders and seasoned professionals, this powerful machine embodies the perfect blend of strength and agility, making it an excellent choice for technical trails, open fields, and everything in between.

At the heart of the Enduro-200/250 is a robust and efficient four-stroke engine. With a displacement of either 200cc or 250cc, riders can expect an optimal balance of power and torque, delivering quick acceleration without sacrificing top-end speed. The engine is built with durability in mind, featuring advanced cooling technologies that help prevent overheating during prolonged rides in challenging conditions.

The chassis of the Enduro-200/250 is a highlight of its engineering prowess. Constructed from lightweight yet sturdy materials, the frame provides outstanding rigidity while keeping the overall weight low. This design not only enhances maneuverability but also contributes to improved handling on a variety of terrains. Riders will appreciate the low center of gravity, which facilitates confident cornering and stability, particularly on steep inclines and rugged surfaces.

Suspension is critical for off-road performance, and the Enduro-200/250 does not disappoint. It comes equipped with high-performance front and rear suspension systems, featuring adjustable settings that allow riders to customize their ride according to their weight, riding style, and the terrain. The long travel suspension ensures that riders can tackle obstacles such as rocks, roots, and deep ruts with ease, providing a smooth and comfortable experience even on the most challenging trails.

In terms of technology, the Enduro-200/250 is packed with features that enhance safety and convenience. The bike includes advanced braking systems, offering responsive stopping power with minimal fade. Additionally, modern LED lighting provides excellent visibility during night rides, ensuring that riders can navigate safely in low-light conditions.

The ergonomics of the Cornelius Enduro-200/250 also play a significant role in rider comfort. The adjustable seat height accommodates a wide range of rider sizes, while the handlebars offer multiple positions to suit different preferences. This thoughtful design enables riders to maintain an optimal riding posture, reducing fatigue during long excursions.

Overall, the Cornelius Enduro-200/250 stands out as a formidable contender in the off-road motorcycle market, fusing innovation, robustness, and rider-friendly features into a single, exceptional package. Whether you're embarking on a weekend trail ride or tackling intense enduro races, the Enduro-200/250 is engineered to elevate your riding experience to new heights.
Top Page Image Contents