Cornelius Enduro-200/250 installation manual Safety Precautions, Description

Page 3

SAFETY PRECAUTIONS

Always: Disconnect power to the dispenser before servicing or cleaning.

Never: Place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rotation occurs automatically when dispenser is energized!

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates contamination of ice.To insure continued protection and sanitation, observe the following:

ALWAYS: Be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior and possible contamination of the ice.

ALWAYS: Be sure the upper and lower front panels are securely fastened.

ALWAYS: Keep area around the dispenser clean of ice cubes.

CAUTION: Dispenser cannot be used with crushed or flaked ice.

Use of bagged ice which has frozen into large chunks can void warranty. The dispenser agitator is not designed to be an ice crusher. Use of large chunks of

ice which ”jam up” inside the hopper will cause failure of the agitator motor and damage to the hopper. If bagged ice is used, it must be carefully and completely broken into small, cube–sized pieces before filling into the dispenser hopper.

DESCRIPTION

The ”ENDURO” series of ice dispensers solves your ice and beverage service needs in a sanitary, space saving, economical way. Designed to be manually filled with ice from any remote ice making source, these dispensers will dispense cubes (up to 1-1/4 in. in size), cubelets, and hard-chipped or cracked ice; and in addition, several flavors of post–mix beverages. The “BC” units include beverage faucets and a cold plate and are designed to be supplied direct from syrup tanks and a carbonator, with no additional cooling required.

SPECIFICATIONS

Model

ED200 (ice only)

ED250 (ice only)

 

 

 

 

B (Beverage Faucets)

B (Beverage Faucets)

 

 

 

 

C (Cold Plate)

C (Cold Plate)

 

 

 

 

Z (No drip tray)

Z (No drip tray)

 

 

 

 

N (No Lid)

N (No Lid)

 

 

 

 

F (Flavor)

F (Flavor)

 

 

 

Ice storage

200 pounds

250 pounds

 

 

 

Maximum No. of

10

10

Beverage Faucets

 

 

Available

 

 

 

 

 

Cold Plate (Built–In)

Yes, On BC Model Only

Yes, On BC Model Only

 

 

 

Electrical

120/1/60, 3.5 Amps

120/1/60, 3.5 Amps

 

220–240/1/50–60, 2.0 Amps

220–240/1/50–60, 2.0 Amps

 

 

 

Dimensions

30 in. Wide X 30-11/16 in. Deep X 35-5/8

30 in. Wide X 30-11/16 in. Deep X 39-5/8

 

in. High

in. High

Z Model

 

 

30 in. Wide X 23-1/16 in. Deep X 35-5/8

30 in. Wide X 23-1/16 in. Deep X 39-5/8

 

in. High

in. High

 

 

 

1

92181INS

Image 3
Contents This Document Contains Important Information To the InstallerTable of Contents Description Safety PrecautionsInstallation Instructions LEG OptionCounter Mounting Gate Restrictor Plate Adjustment Gate Restrictor Plate Unit With SIX Faucets Flow DiagramEight Carbonator CO2Faucets TEN Unit withFlow Diagram B Unit with Wiring Diagram Schematic 115 Volt Unit Wiring Diagram 220-240 Volt Unit Wiring DiagramSchematic 220-240 Volt Unit Troubleshooting Flavor Syrups do not Dispense Beverage not Sweet EnoughBeverages not Cold Units with BUILT-IN Cold PlateWarranty

Enduro-200/250 specifications

The Cornelius Enduro-200/250 is a cutting-edge off-road motorcycle designed for enthusiasts who crave adventure and versatility. Engineered for both novice riders and seasoned professionals, this powerful machine embodies the perfect blend of strength and agility, making it an excellent choice for technical trails, open fields, and everything in between.

At the heart of the Enduro-200/250 is a robust and efficient four-stroke engine. With a displacement of either 200cc or 250cc, riders can expect an optimal balance of power and torque, delivering quick acceleration without sacrificing top-end speed. The engine is built with durability in mind, featuring advanced cooling technologies that help prevent overheating during prolonged rides in challenging conditions.

The chassis of the Enduro-200/250 is a highlight of its engineering prowess. Constructed from lightweight yet sturdy materials, the frame provides outstanding rigidity while keeping the overall weight low. This design not only enhances maneuverability but also contributes to improved handling on a variety of terrains. Riders will appreciate the low center of gravity, which facilitates confident cornering and stability, particularly on steep inclines and rugged surfaces.

Suspension is critical for off-road performance, and the Enduro-200/250 does not disappoint. It comes equipped with high-performance front and rear suspension systems, featuring adjustable settings that allow riders to customize their ride according to their weight, riding style, and the terrain. The long travel suspension ensures that riders can tackle obstacles such as rocks, roots, and deep ruts with ease, providing a smooth and comfortable experience even on the most challenging trails.

In terms of technology, the Enduro-200/250 is packed with features that enhance safety and convenience. The bike includes advanced braking systems, offering responsive stopping power with minimal fade. Additionally, modern LED lighting provides excellent visibility during night rides, ensuring that riders can navigate safely in low-light conditions.

The ergonomics of the Cornelius Enduro-200/250 also play a significant role in rider comfort. The adjustable seat height accommodates a wide range of rider sizes, while the handlebars offer multiple positions to suit different preferences. This thoughtful design enables riders to maintain an optimal riding posture, reducing fatigue during long excursions.

Overall, the Cornelius Enduro-200/250 stands out as a formidable contender in the off-road motorcycle market, fusing innovation, robustness, and rider-friendly features into a single, exceptional package. Whether you're embarking on a weekend trail ride or tackling intense enduro races, the Enduro-200/250 is engineered to elevate your riding experience to new heights.