Installation Instructions, LEG Option | Cornelius Enduro-200/250

INSTALLATION INSTRUCTIONS

1.Locate the dispenser indoors on a level counter top.

A. LEG OPTION

Note: Before installing legs, the plastic plugs must be removed.

Unpack the four (4) legs and install them into the threaded holes provided in the bottom of the unit. The installer must provide flexibility in the product and utility supply lines to permit shifting the position of the dispenser sufficiently to clean the area beneath it.

Rotate the line support bracket, located under base, to the down position and route all the lines above the bracket.

B.COUNTER MOUNTING

The ice dispenser must be sealed to the counter. The MOUNTING TEMPLATE (see Figure 3) indicates where openings can be cut in the counter. Locate the desired position for the dispenser, then mark the outline dimensions on the counter using the MOUNTING TEMPLATE. Cut openings in the counter.

Rotate the line support bracket, located under base, to the up position and route all the lines below the bracket.

Apply a continuous bead of National Sanitation Foundation (NSF) listed silastic sealant (Dow 732 or equal) approximately 1/4” inside of the unit outline dimensions and around all openings. Then, position the unit on the counter within the outline dimensions. All excess sealant must be wiped away immediately.

2.The beverage tubes, drain tube and power cord are routed through the large opening in the bottom of the unit. See the MOUNTING TEMPLATE (see Figure 3), for locating the required clearance hole in the counter for these utility lines.

3.DRIP TRAY DRAIN ASSEMBLY (see Figure 1). Route the drain tube to an open drain with the end of the tube above the “flood” level of the drain. Use the tubing, fittings, clamps, and insulation provided with the Dis- penser to assemble the drain. The completed drain line must pitch continuously downward and contain no “traps” or improper drainage will result.

NOTE: This equipment must be installed with adequate backflow protection to comply with federal, state, and local codes.

4.Connect the beverage system product tubes as indicated in the applicable Flow Diagram. This work should be done by a qualified Service Person. Any non-carbonated water tubing must be connected to the outlet of the check valve.

Note: See applicable Flow Diagram (see Figure 4 through 7) or decal on lower front panel of the unit for the location of syrup and water connections.

Note: Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed and maintained according to Federal, State and Local Laws.

5.Clean the hopper interior (see Owner’s Manual P/N 92108 for cleaning instructions).

6.Connect the power cord to a 120 volt, 60 cycle, 3–wire grounded receptacle. For 220–240 volt units, a 3–wire power cord is provided. An adapter plug for the particular country will need to be provided by the equipment Installer.

92181INS

Enduro-200/250 specifications

The Cornelius Enduro-200/250 is a cutting-edge off-road motorcycle designed for enthusiasts who crave adventure and versatility. Engineered for both novice riders and seasoned professionals, this powerful machine embodies the perfect blend of strength and agility, making it an excellent choice for technical trails, open fields, and everything in between.

At the heart of the Enduro-200/250 is a robust and efficient four-stroke engine. With a displacement of either 200cc or 250cc, riders can expect an optimal balance of power and torque, delivering quick acceleration without sacrificing top-end speed. The engine is built with durability in mind, featuring advanced cooling technologies that help prevent overheating during prolonged rides in challenging conditions.

The chassis of the Enduro-200/250 is a highlight of its engineering prowess. Constructed from lightweight yet sturdy materials, the frame provides outstanding rigidity while keeping the overall weight low. This design not only enhances maneuverability but also contributes to improved handling on a variety of terrains. Riders will appreciate the low center of gravity, which facilitates confident cornering and stability, particularly on steep inclines and rugged surfaces.

Suspension is critical for off-road performance, and the Enduro-200/250 does not disappoint. It comes equipped with high-performance front and rear suspension systems, featuring adjustable settings that allow riders to customize their ride according to their weight, riding style, and the terrain. The long travel suspension ensures that riders can tackle obstacles such as rocks, roots, and deep ruts with ease, providing a smooth and comfortable experience even on the most challenging trails.

In terms of technology, the Enduro-200/250 is packed with features that enhance safety and convenience. The bike includes advanced braking systems, offering responsive stopping power with minimal fade. Additionally, modern LED lighting provides excellent visibility during night rides, ensuring that riders can navigate safely in low-light conditions.

The ergonomics of the Cornelius Enduro-200/250 also play a significant role in rider comfort. The adjustable seat height accommodates a wide range of rider sizes, while the handlebars offer multiple positions to suit different preferences. This thoughtful design enables riders to maintain an optimal riding posture, reducing fatigue during long excursions.

Overall, the Cornelius Enduro-200/250 stands out as a formidable contender in the off-road motorcycle market, fusing innovation, robustness, and rider-friendly features into a single, exceptional package. Whether you're embarking on a weekend trail ride or tackling intense enduro races, the Enduro-200/250 is engineered to elevate your riding experience to new heights.