６Ｆ８Ａ０８７０
SAFETY PRECAUTIONS (continued)
Safety Precautions for Installation and Wiring
CAUTION
| Install a switch and fuse to isolate the | Use an appropriate device to carry and install | ||
LF414/LF600F, LF414/LF610F, | the LF414/LF600F,LF414/LF610F, | ||
LF414/LF620F and LF414 from mains | LF414/LF620F and LF414. | ||
power. | Power supply from mains power |
| If this product falls to the ground, |
|
| ||
| can cause electric shock or |
| injury, or malfunction of or damage |
DO | circuit | DO | to the product, can be caused. |
|
| ||
| Turn off mains power before | Do not modify or disassemble the | ||
conducting wiring work. | LF414/LF600F, LF414/LF610F, LF414/LF620F | ||
|
| and LF414 unnecessarily. | |
| Wiring while power is applied |
| Modifying or disassembling this |
| can cause electric shock. |
| product can cause |
DO |
| DON’T | electric shock, malfunction of or |
| damage to this product. | ||
Turn off mains power before working on Ground the LF414/LF600F, LF414/LF610F,
pipes. |
| LF414/LF620F and LF414 independently from | |
|
| power equipment. | |
|
| (100 ohm or less ground resistance) | |
| Working on pipes while power |
| Operating this product |
| is applied can cause |
| without grounding can cause |
DO | electric shock. | DO | electric shock or malfunction. |
|
| ||
Do not conduct wiring work with bare | Use crimped terminal lugs for the terminal | ||
| hands. |
| board and GND terminal. | |
| Remaining electric charge |
| Loose connections can cause |
| even if power is turned off can |
| electric shock, fire from |
DON’T | still cause electric shock. | DO | excessive current or system |
| malfunction. | ||
Do not work on piping and wiring with wet hands.
Wet hands may result in electric shock.
DON’T
The label shown left is placed near the terminal board for power supply on the converter.
(A black border and symbol on yellow triangle) Be alert to electric shock.
