６Ｆ８Ａ０８７０
4. Installation
Safety Precautions for Installation
WARNING
Do not live active circuits under environment of explosive atmospheres.
Live part of electric circuit or a high temperature department can cause explosion.
DON’T
Do not use parts of other products.
Protective performance degradation for hazardous location can cause explosion.
DON’T
Do not active live circuits While assembly of all components is not over.
Protective performance degradation for hazardous location can cause explosion.
DON’T
Install per the National Electrical Code for the US (NEC, ANSI/NFPA 70) and the Canadian Electrical code for Canada (CEC,
Unsuitable conduit connections for hazardous location can cause explosion.
DO
|
| CAUTION | ||
| Ground the LF414/LF600, LF414/LF610F, | Use an appropriate device to carry and install | |||
| LF414/LF620F and LF414 independently | the LF414/LF600, LF414/LF610F, | |||
| from power equipment. (100 ohm or less | LF414/LF620F and LF414. | |||
| ground resistance) |
| If his product falls to the ground, | ||
| Operating this product without |
| ||
|
| injury, or malfunction of or damage to | ||
| grounding can cause electric |
| ||
|
| the product, can be caused. | ||
DO | shock or malfunction. | DO | ||
| ||||
|
|
| ||
Install a switch and fuse to isolate the | Do not modify or disassemble the | |||
| LF414/LF600F, LF414/LF610F, | LF414/LF600F, LF414/LF610F, LF414/LF620F | |||
| LF414/LF620F and LF414 from mains power. | ||||
| and LF414 unnecessarily. | ||||
| Power supply from mains power | |||
|
| Modifying or disassembling this product | ||
| can cause electric shock or |
| can cause electric shock, malfunction | |
DO | circuit | DON’T | or damage to this product. | |
|
| |||
| Do not work on piping and wiring with wet |
| The label shown left is placed | ||
hands. |
|
| ||
|
| near the terminal board for power | ||
| Wet hands may result in electric |
| ||
|
| supply to the converter. | ||
| shock |
| ||
|
| Be alert to electric shock | ||
|
|
| ||
DON’T
