６Ｆ８Ａ０８７０
7.2 Troubleshooting
If a problem occurs while using the LF414/LF600F, LF414/LF610F, LF414/LF620F and LF414, follow the flowcharts described below.
You may find a way to solve the problem. The flowcharts are based on three symptoms (1) to (3). If you cannot solve the problem, contact your nearest Toshiba representative.
7.2.1 Flow rate is not indicated
START
Are power supplies correct NO for each device?
YES
Are power and I/O cables NO installed correctly?
YES
Use the correct power supply for each device.
Install the cables correctly.
Refer to Chapter 5, “Wiring.”
Is the fuse burnt?
YES
Replace the fuse with a new one.
NO
Is the flow range correctly set? NO
YES |
| |
Is the flow direction match | NO | |
with the arrow mark on the | ||
| ||
detector? |
| |
YES |
|
Contact your nearest Toshiba representative.
Set correctly.
Refer to combined converter's manual.
Install the detector correctly. Refer to Chapter 4, “Installation”
