Cornelius 175 8 Valve manual To the Installer, This Document Contains Important Information

Page 1

IMI CORNELIUS INC g One Cornelius Place

g Anoka, MN 55303

Telephone (800) 238–3600

Facsimile (800) 535–4231

Operator’s Manual

ICE/BEVERAGE DISPENSER

Model: Enduro-175 8 Valve

IMPORTANT:

TO THE INSTALLER.

It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment is provided with protection against backflow by an air gap as defined in ANSI/ASME A112.1.2-1979; or an approved vacuum breaker or other such method as proved effective by test.

Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed, and maintained according to Federal, State, and Local Codes.

Part No. 620917901OPR

Release Date: March 1, 2004

Revision Date: N/A

Revision: A

THIS DOCUMENT CONTAINS IMPORTANT INFORMATION

This Manual must be read and understood before installing or operating this equipment

IMI CORNELIUS INC; 2004

PRINTED IN U.S.A

 

Page 1 Page 2
Image 1
Page 1 Page 2
Contents This Document Contains Important Information To the InstallerTable of Contents Cleaning Instructions MaintenanceMonthly START-UP & Operating InstructionsBeverage System if Applicable Cleaning Interior SurfacesCold Plate Product Tubing Dispensing ValvesSanitize syrup lines, B-I-B Systems Troubleshooting Beverages not Cold Units with BUILT-IN Beverages not Sweet EnoughCold Plate Flavor Dispenses More than .5 OZGreece D WarrantyIMI Cornelius INC
Top Page Image Contents