Foster KS 60 user manual Installation, YELLOW-GREEN = Earth Blue = Neutral Brown = Phase

INSTALLATION

ATTENTION: This appliance can be installed and operated only in rooms that are continuously ventilated according to UNI 7129/UNI 7131. IMPORTANT: The installation must be carried out by professionally qualified personnel following the manufacturer's instructions. Any maintenance on the appliance must be performed with the appliance disconnected from the electrical power supply and with the gas supply tap closed. The installation must be carried out in compliance with the current regulations in the country in which the appliance will be used.

Gas connection

For the connection of the appliance to the gas distribution system or a gas cylinder, use the rigid metal pipe in copper or steel with relative fittings compliant with the standard UNI-CIG 7129 or the flexible hose in stainless steel with continuous wall compliant with standard UNI-CIG 9891. The pressure regulators used must be compliant with the standard UNI -CIG 7432.

Electrical connection

The electrical connection must be carried out by a qualified technician according to the manufacturer's instructions and in compliance with current local standards. Make sure the voltage matches the value indicated on the technical data plate visible, with the door open, on one of the side edges of the cavity. If the plug is not easily accessible, the installer must provide an omni-polar switch with a contact opening distance of at least 3 mm. The appliance is supplied with a plugless cable. A normalized plug must be used, taking into consideration that:

YELLOW-GREEN = EARTH

BLUE = NEUTRAL

BROWN = PHASE

The appliance is required by law to have an earth connection. Do not use multiple sockets or extension cords.

25