Turning on the Oven, During Operation

TURNING ON THE OVEN

The oven is equipped with electric ignition. To turn on the oven, open the door completely. Press the thermostat knob slightly and turn it counter-clockwise to the maximum. Press the knob completely to trigger the electric ignition and keep the knob pressed for a few seconds. However, do not activate the device for more than 15 seconds.

If the burner does not light in 15 seconds, keep the door completely open and wait at least 1 minute before trying again.

NOTE: when the oven is turned on for the first time, it is normal to have to repeat the operation several times due to the presence of air in the gas supply line. Once the flame is lit, keep the thermostat knob pressed for a few seconds to activate the safety thermocouple that would otherwise block the gas supply. Check the successful lighting of the burner through the slots located in the front part of the oven plate; if it is not lit, repeat the operation.

The proper operation of the burner should be checked with the oven door closed.

DURING OPERATION

Keeping the door closed, check that the cooling fan is operating properly. If the fan does not work, proceed as follows:

1.check the power supply; if there is a power failure stop baking, turn off the appliance and wait for power to be restored.

2.if there is no power failure, do not use the oven and contact the service centre. If the oven door is opened during use, the fan stops to prevent the flow of hot air in the direction of the user; once the door is closed again the fan resumes operation; if this does not occur, perform the checks listed in points 1 and 2.

Warning

The oven burner has a safety valve whichblock the gas flow in the following cases:

-If the thermostat knob is accidentally turned with immediate gas flow.

-If the burner flame is accidentally cut off.

-In the case of lack of gas depending by the gas provider.

Ignition: the oven is switched on with the door wide open.

If the door is just partially open, a safety system blocks the automatic ignition of burners.

KS 60 specifications

The Foster KS 60 is a cutting-edge piece of industrial equipment designed for optimal performance in demanding environments. This versatile machine is engineered for efficiency and precision, making it an essential tool in various sectors, including manufacturing, construction, and logistics.

One of the main features of the Foster KS 60 is its robust build quality. Constructed with high-grade materials, it ensures longevity and reliability even under the most challenging conditions. The frame is designed to withstand heavy loads, while the components are tested to ensure they can handle continuous operation without compromising performance.

A standout characteristic of the KS 60 is its advanced automation capabilities. The integration of smart technologies allows for seamless operation, reducing the need for manual intervention. This automation not only enhances productivity but also minimizes the risk of human error, leading to more consistent output quality. The user-friendly interface provides operators with real-time data and insights, enabling them to monitor the machine's performance effortlessly.

Moreover, the Foster KS 60 features adaptive speed controls, allowing it to adjust its performance based on the specific requirements of each task. This adaptability ensures optimal energy efficiency, reducing operational costs while maintaining high productivity levels. The machine’s energy-saving mode is particularly beneficial for environment-conscious operations, further solidifying its reputation as a sustainable choice.

The KS 60 also incorporates advanced safety features, making it a reliable option for teams working in high-risk environments. Emergency stop systems, overload protection, and fail-safe mechanisms are all designed to ensure the safety of operators and the surrounding workforce.

In terms of maintenance, the Foster KS 60 is user-friendly. Its modular design simplifies access to critical components, allowing for easier servicing and reduced downtime. This means that operators can conduct routine maintenance with minimal disruption to workflow.

Overall, the Foster KS 60 stands out as a versatile, efficient, and reliable machine that caters to the needs of modern industries. With its combination of robust construction, smart technology, adaptive performance, and safety features, it is poised to enhance productivity and operational efficiency across various applications. Whether for heavy-duty tasks or precision jobs, the Foster KS 60 is engineered to meet and exceed the expectations of its users.