Installation Instructions

ØBefore Using Your Beer Cooler

·Remove the exterior and interior packing.

·Check to be sure you have all of the following parts:

·Instruction manual

·1 Safety Guard Rail

·1 Drip Tray (2 Pieces)

·1 CO2 Cylinder Support

·1 CO2 Regulator (Box)

·1 CO2 Empty Cylinder(Box)

·1 CO2 Air Line Hose (Red)

·1 Beer Keg Coupler (Box)

·1 Beer Tower

·1 Pull Handle (Beer Tower Faucet)

·1 metal wrench

·4 Plugs: For Guard Rail Holes

·1 Metal Plate For Cabinet Bottom

·2 Steel wire shelves

·1 Steel Clamp for Red Hose

·4 Casters with lock

·Before connecting the Beer Cooler to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

·Clean the interior surface with lukewarm water using a soft cloth.

ØInstalling Your Beer Cooler

·This appliance is designed to be free standing only, and should not be recessed or built-in.

·Place your Beer Cooler on a floor that is strong enough to support the Beer Cooler when it is fully loaded.

·Allow 3 inches of space between the back and sides of the Beer Cooler, which allows the proper air circulation to cool the compressor.

·Locate the Beer Cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the Beer Cooler not to perform properly. This unit is not designed for outside installation (ie garages, porches etc.)

·Avoid locating the Beer Cooler in moist areas.

·Plug the Beer Cooler into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized service center.

·After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing any contents in the Beer Cooler compartment.

BCR 500 specifications

The Equator BCR 500 is a revolutionary appliance designed to elevate the cooking experience while offering versatility and convenience. This multi-function device combines the capabilities of a traditional oven, air fryer, and dehydrator, making it an essential addition to any modern kitchen. With its sleek design and user-friendly interface, the BCR 500 is tailored for both novice cooks and culinary enthusiasts.

One of the standout features of the Equator BCR 500 is its advanced cooking technology. The device utilizes a powerful convection system that circulates hot air evenly around the food, ensuring that it cooks uniformly and retains all its natural flavors. This technology allows for healthier cooking options, as it significantly reduces the need for added oils and fats, making meals lighter without compromising taste.

The BCR 500 also boasts an impressive range of cooking modes. Whether you want to bake, broil, roast, or fry, this appliance can do it all with ease. Its air frying capability allows for crispy textures often associated with deep-frying, yet it uses a fraction of the oil, making it a healthier option. Moreover, the dehydrator function is perfect for preparing snacks like dried fruits and jerky, accommodating diverse diets and preferences.

Another noteworthy characteristic of the Equator BCR 500 is its digital control panel. The intuitive interface provides precise temperature control and cooking time settings for various recipes, making it simple to achieve the perfect results. Pre-programmed settings for different types of food take the guesswork out of cooking, while a built-in timer ensures that nothing is overcooked or burnt.

Safety is a key consideration in the design of the BCR 500. It features an automatic shut-off function that activates if the appliance is running idle for too long, preventing overheating. Additionally, the exterior remains cool to the touch during operation, minimizing the risk of burns.

Overall, the Equator BCR 500 is an innovative appliance that combines modern technology with user-friendly features. Its versatility makes it suitable for a wide range of cooking tasks, while its focus on health and safety ensures a positive culinary experience. Whether you're preparing a gourmet meal or a quick snack, the BCR 500 is an investment that brings efficiency and enjoyment to everyday cooking.