Equator BCR 500 manual Installing the CO2 Cylinder Support, Installing the CO2 Regulator

Page 10

Installing the CO2 Cylinder Support

·Install the metal support provided onto the 4 studs located on the exterior back wall. Align the holes in the support with the studs and push down firmly. (See Figure 1)

Installing the CO2 Cylinder

·Install your fully charged cylinder into the support stand.

Installing the CO2 Regulator

·Attach the CO2 regulator to the cylinder by turning the regulator nut onto cylinder valve, making sure washer is securely inserted into connecting nut. Tighten snug using an adjustable wrench (not supplied) and assure there are no leaks. (See Figure 2)

Installing the CO2 Air Line Outside Cabinet

·Remove plug located at the exterior back (top left hand corner).

·Save it for later use if you decide to convert unit to an all refrigerator.

·Insert the open end of the air line (red) line the cabinet through the uncovered hole. (See Figure 4)

Installing the CO2 Air Line Hose To Regulator

·Attach the open end of the red hose to the hose barb connection on the regulator

·Secure hose by using one clamp provided. Use pliers/screwdriver to tighten clamp to prevent leaks. (See Figure 3)

Installing the Beer Tower

·Remove the top plug by twisting and pulling out, saving it for later use if you decide to convert unit to an all refrigerator unit.

·Unravel the beer line (clear hose) from the tower and insert the beer line and wing nut through the uncovered hole on top.

·Lock the beer tower assembly to the top and make sure to position the beer faucet so it is aligned with the cabinet front (6 o’clock position). You accomplish this by aligning the bottom of the beer tower to the 3 grooves on the top cabinet and tighten by hand clockwise to properly lock.

Installing the Protective Metal Plate

·This plate should always be installed when the keg is in place to protect against unnecessary damage to the floor of the cabinet.

Fig. 1

Fig. 2

Fig. 3

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Beer Cooler Table of Contents Warranty Information WarrantyService & Support Names of the Parts Model NO. BCR500Important Safety Instructions ~WARNING~Before Using Your Beer Cooler Installation InstructionsInstalling Your Beer Cooler ~Warning~ Electrical ConnectionInstallation Diagram Installing the Casters Installation Instructions for Beer KEGBefore Installation II Installation with Casters Installing the CO2 Regulator Installing the CO2 Cylinder SupportInstalling the CO2 Cylinder Installing the CO2 Air Line Outside CabinetInstalling the CO2 Air Line Hose Installing the Beer KegInstalling the Keg Coupler Connecting the beer tower to couplerSpanner Faucet Wrench Operating Your Beer Cooler Dispensing of BeerBarrel Converting To An All Refrigerator Changing the Reversible Door Vacation Time Care and MaintenanceCleaning Your Beer Cooler Moving Your Beer CoolerTroubleshooting Guide Problem Possible CauseEquator Advanced Appliances

BCR 500 specifications

The Equator BCR 500 is a revolutionary appliance designed to elevate the cooking experience while offering versatility and convenience. This multi-function device combines the capabilities of a traditional oven, air fryer, and dehydrator, making it an essential addition to any modern kitchen. With its sleek design and user-friendly interface, the BCR 500 is tailored for both novice cooks and culinary enthusiasts.

One of the standout features of the Equator BCR 500 is its advanced cooking technology. The device utilizes a powerful convection system that circulates hot air evenly around the food, ensuring that it cooks uniformly and retains all its natural flavors. This technology allows for healthier cooking options, as it significantly reduces the need for added oils and fats, making meals lighter without compromising taste.

The BCR 500 also boasts an impressive range of cooking modes. Whether you want to bake, broil, roast, or fry, this appliance can do it all with ease. Its air frying capability allows for crispy textures often associated with deep-frying, yet it uses a fraction of the oil, making it a healthier option. Moreover, the dehydrator function is perfect for preparing snacks like dried fruits and jerky, accommodating diverse diets and preferences.

Another noteworthy characteristic of the Equator BCR 500 is its digital control panel. The intuitive interface provides precise temperature control and cooking time settings for various recipes, making it simple to achieve the perfect results. Pre-programmed settings for different types of food take the guesswork out of cooking, while a built-in timer ensures that nothing is overcooked or burnt.

Safety is a key consideration in the design of the BCR 500. It features an automatic shut-off function that activates if the appliance is running idle for too long, preventing overheating. Additionally, the exterior remains cool to the touch during operation, minimizing the risk of burns.

Overall, the Equator BCR 500 is an innovative appliance that combines modern technology with user-friendly features. Its versatility makes it suitable for a wide range of cooking tasks, while its focus on health and safety ensures a positive culinary experience. Whether you're preparing a gourmet meal or a quick snack, the BCR 500 is an investment that brings efficiency and enjoyment to everyday cooking.
Top Page Image Contents