Foster e 7370 230, 7331 230 Cooking Advices, Control panel locking, Pan quality, Pan dimension

Page 10

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning the control panel can be locked (with exception to the On/Off key [ ]).

Locking :

 

 

Action

Control panel

Display

Start

Press key [ ]

3 or 4 x [ 0 ] or [ H ]

Hob locking

Press simultaneously [ - ] and [ + ]

 

 

at front right**

No modification

 

Repress key [ + ]

3 or 4 x [ L ]

Unlocking :

 

 

Action

Control panel

Display

Start

Press key [ ]

3 or 4 x [ L ]

In the 5 seconds after start :

 

 

Unlocking the hob

Press simultaneously [ - ] and [ + ]

 

 

at front right**

3 or 4 x [ 0 ]

 

Repress key [ - ]

No light on the

 

 

Displays

** for the 3 zone hob use [ + ] from the front left zone display

COOKING ADVICES

Pan quality

Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium with ferromagnetic bottom.

Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom, cupper, brass, glass, ceramic, porcelain.

The manufacturers specify if their products are compatible induction.

To check if pans are compatibles :

Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water must heat in a few seconds.

A magnet stucks on the bottom of the pan.

Certain pans can make noise when they are placed on an induction cooking zone. This noise doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.

Pan dimension

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan. However the bottom of this pan must have a minimum of diameter according to the corresponding cooking zone.

To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking zone.

24

Image 10
Contents Cod 230 e 7370 Summary Dear clientsPrecautions before using SafetyUsing the appliance Precautions in case of appliance failure Precautions not to damage the applianceOther protections Description of the Appliance Technical characteristicsControl panel USE of the Appliance STARTING-UP and Appliance Management Pan detection ∙ Start-up/ switch off the hob Action Control panel Display Starting-up Residual heat indicationBooster function Timer∙ Power management Action Control panel Display∙ To stop the cooking time Action Control panel Display ∙ Egg timer function Action Control panelAutomatic cooking ∙ Automatic stop at the end of the cooking timeControl panel locking Cooking AdvicesPan dimension Pan qualityExamples of cooking power setting Maintenance and CleaningSwitch-off the appliance before cleaning Hob or the cooking zone doesn’t start-up What to do in Case of a ProblemSymbol E 4 displays Control panel displays UEnvironment Preservation How to stick the gasket Installation InstructionsFitting installing ∙ The cut out sizes are Electrical Connection Connection of the hobFoster spa