Foster e 7370 230 Booster function, Timer, Action Control panel Display, ∙ Power management

Page 8

Booster function

The booster function [ B ] grants a boost of power to the selected heating zone.

If this function is activated the heating zones works during 10 minutes with an ultra high power. The booster is foreseen for example to heat up rapidly big quantities of water, like for noodles cooking.

Start up / Stop the booster function :

Action

Control panel

Display

Zone selection

Press key [ + ] from the zone

[ 0

]

Increase power

Press key [ + ] or [ - ]

[ 1

] to [ 9 ]

Start up the booster

Press key [ B ]

[ P ] during 10 min

Stop the booster

Press key [ - ]

[ 9

]

 

or press key [ B ]

[ 9

]

The booster function [ B ] can also be started directly :

 

 

Action

Control panel

Display

Zone selection

Press key [ + ] from the zone

[ 0 ]

Start up the booster

Press key [ B ]

[ P ] during 10 min

Stop the booster

Press key [ - ]

[ 9 ]

 

or press key [ B ]

[ 9 ]

Power management :

The whole cooking hob is equipped by a maximum of power. When the booster function is activated, and not to exceed the maximum power, the electronic system orders to reduce automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).

Heating zone selected

The other heating zone: (example: power level 9)

[ P ] is displayed

[ 9 ] goes to [ 7 ] or [ 8 ] depending the type of zone

Timer

The timer is able to be used simultaneous with all 3 or 4 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time :

Action

Control panel

Display

Zone selection

Press key [ + ] from the zone

[ 0

]

Increase power

Press key [ + ] or [ - ]

[ 1

] to [ 9 ]

To select « Timer »

Press key [

]

Timer [ 00 ] min

Decrease the time

Press key [ - ]

 

[ 00 ] goes to 60,59…

Increase the time

Press key [

]

The time increases

After a few seconds the control light stops with blinking.

The time is confirmed and the cooking starts until the time reaches [ 00 ].

22

Image 8
Contents Cod 230 e 7370 Summary Dear clientsUsing the appliance SafetyPrecautions before using Other protections Precautions not to damage the appliancePrecautions in case of appliance failure Control panel Technical characteristicsDescription of the Appliance USE of the Appliance STARTING-UP and Appliance Management∙ Start-up/ switch off the hob Action Control panel Display Starting-upPan detection Residual heat indicationTimer ∙ Power managementBooster function Action Control panel Display∙ Egg timer function Action Control panel Automatic cooking∙ To stop the cooking time Action Control panel Display ∙ Automatic stop at the end of the cooking timeCooking Advices Pan dimensionControl panel locking Pan qualitySwitch-off the appliance before cleaning Maintenance and CleaningExamples of cooking power setting What to do in Case of a Problem Symbol E 4 displaysHob or the cooking zone doesn’t start-up Control panel displays UEnvironment Preservation Fitting installing ∙ The cut out sizes are Installation InstructionsHow to stick the gasket Electrical Connection Connection of the hobFoster spa