CD Operations, Random/Repeat playback, Playback

CD OPERATIONS

To replace disc(s) during playback without interruption

While one disc is being played back, press DISC CHANGE so that the compartment opens, replace disc(s) with other one(s), and press DISC CHANGE to close the compartment.

Random/Repeat playback

Random playback plays all the tracks on one desired disc or all the discs in random order. Repeat playback plays all the tracks repeatedly on one desired disc or all the discs.

This unit plays back finalized CD-R/RW discs as well as audio CDs.

Playback

1Press CD and load disc(s).

Press zOPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up. To place three discs, press DISC CHANGE so that the trays rotate, then place the third one. Lastly, close the compartment with zOPEN/CLOSE.

•When loading an 8-cm (3-inch) disc, place it on the inner circle of the tray.

•When pressing zOPEN/CLOSE or DISC CHANGE, the unit switches to the CD from any other functions.

2To play all discs, press c.

To play one desired disc, press DISC DIRECT PLAY 1-3.

DISC DIRECT PLAY indicator being played back lights up.

To stop playback

Press s.

To pause playback

Press a. Press again to resume playback.

To skip to the beginning of the current/preceding/ succeeding track

Press for grepeatedly or turn MULTI JOG.

To search (playback in fast forward or fast reverse)

Hold down for g. Release at the desired point.

To select a disc and a track with the remote control 1 Press DISC DIRECT PLAY 1-3 to select a disc.

2 Press the numbered buttons to select a track.

-To select track 20, press +10, +10 and 0.

-To select track 15, press +10 and 5.

To display the remaining playback time of the CD

Press SHIFT+CD EDIT/CHECK on the remote control. Press again to return to the elapsed time display.

•Remaining playback time cannot be displayed during random playback or programed playback.

1Press SHIFT+RANDOM/REPEAT repeatedly on the remote control to select one of the following modes:

-Random playback: "RNDM" lights up.

-Repeat playback: "[" lights up.

-Random and repeat playback: "RNDM" and "[" lights up.

2To play one desired disc, press DISC DIRECT PLAY 1-3.

To play all discs, press c.

To cancel random/repeat playback

Press SHIFT+RANDOM/REPEAT repeatedly on the remote control so that both "RNDM" and "[" disappear on the display.

To repeat a selected set of tracks

Select the tracks with programed playback, then press SHIFT+RANDOM/REPEAT on the remote control to select repeat playback.

•It is impossible to play a selected set of tracks in random order.