Aiwa NSX-TR77 manual Programed playback, To check the program, To clear the program

Programed playback

Plays back up to 30 selected tracks in programed order.

1Press SHIFT+PROGRAM on the remote control during stop.

"PRGM" lights up on the display.

2Press DISC DIRECT PLAY 1-3 to select a disc. Go to the next step when the tray stops rotating.

3Press the numbered buttons on the remote control to program a track.

The selected track number lights up on the display.

-To select the 20th track, press +10, +10 and 0.

-To select the 15th track, press +10 and 5.

4Repeat step 2 and 3 to program other tracks.

5Press c.

•During programed playback, you cannot select a disc or a track with the numbered buttons. "CAN'T USE" is displayed when you try to select a track.

•If the total playback time of the program exceeds 99:59 minutes, or if a track with a track number exceeding 30 is programed, the playing time is displayed as "- -:--".

•You cannot program more than 30 tracks. "FULL" is displayed.

To check the program

Press f or g repeatedly during stop. The track number and program number are displayed in succession.

To clear the program

Press sduring stop. "PRGM" disappears on the display.

To add tracks to the program

Repeat step 2 and 3 before starting playback. The tracks are added to the end of the program.

To change the programed tracks

Clear the program and reselect the tracks in your desired order.

Notes on CDs

•Do not place more than one disc on one tray. •Do not tilt the unit with discs loaded.

•The unit may not play a CD-R/RW disc recorded on personal computers or certain kinds of CD-R/RW recorders.

•Do not attach adhesive label, etc. to either side of a CD-R/

RW disc, as doing so may cause malfunction.En •Do not load an unrecorded CD-R/RW disc. The disc may

be damaged.

•Do not use irregular-shaped CDs.

11