To display the timer setting
Press SHIFT+TIMER on the remote control.
The
Tip:
Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or a within 6 seconds after SHIFT+TIMER is pressed, you can enter the timer setting mode and change the setting.
To change the timer setting
To cancel the timer
Press SHIFT+TIMER on the remote control repeatedly until "
OFF" is displayed. "5" disappears from the display.
Tip:
Your timer setting is retained even if the timer is canceled. Next time the timer is activated, you can change your previous setting, or simply use the same setting again.
Timer recording
Timer recording is available only for TUNER and VIDEO/AUX (with an external timer) sources.
1Press SHIFT+TIMER on the remote control repeatedly to display "
REC".
On the unit, press MODE repeatedly to display | En |
"TIMER", and press ENTER within 4 seconds. Then | |
turn MULTI JOG within 6 seconds to select " REC", |
|
and press ENTER within 4 seconds. |
|
2Carry out step 2 to step 5 described in "Timer playback".
3Prepare the source.
To record the radio, select the band and tune in to the desired station.
To record external equipment connected to the VIDEO/ AUX jacks, set an external timer for the equipment so that its playback begins at the same time.
4Insert the recording tape in DECK 2 and then turn the unit off.
Tip:
The display is dimmed while the timer recording is active.
19