ECO mode
Reduces power consumption with the following operations, etc.
-The unit blacks out when the unit is turned off. Only the red indicator lights up. (Only when the clock is set.)
-If dimmer mode is set to on, the unit illumination brightens (for 10 seconds) only when you operate the unit.
1Press MODE repeatedly to display "ECO", and then press ENTER within 4 seconds.
2Turn MULTI JOG to select "ECO ON" and then press ENTER.
If there is no MULTI JOG or button operation within 6 seconds, the setting is canceled.
To cancel the ECO mode
Repeat the above and select "ECO OFF".
Dimmer
Adjusts the brightness of the display.
1Press MODE repeatedly to display "DIMMER" when the unit is turned on, and then press ENTER within 4 seconds.
2Turn MULTI JOG to select one of the three dimmer modes or
ENTER.
If there is no MULTI JOG or button operation within 6 seconds, the setting is canceled.
To cancel the dimmer
Repeat the above and select
Setting the clock
1Press CLOCK on the remote control.
On the unit, press MODE repeatedly to display "CLOCK", and then press ENTER within 4 seconds.
2Press for gto set the time.
Each press changes the time in
it down changes the time in
•MULTI JOG is also available in place of for g.
3Press ENTER or aSET.
The time display stops flashing and the clock starts from 00 seconds.
To display the time
Press CLOCK on the remote control.
The time will be displayed for 6 seconds, but it cannot be displayed during recording.
To switch to the 24-hour standard
Display the time and press swithin 6 seconds.
With each press, the clock alternates between the
Tip:
In the
If the clock display flashes when the unit is turned off
There has been a power interruption.
9