Troubleshooting

To Replace:

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

■Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions.

2.Hold oven door so that the top edge of each door slot is horizontal. Insert door hinge into the hinge slots.

3.Tilt top of door toward range. Insert bottom door hinge notch down onto front frame edge.

4.Open the door completely and remove the hinge pins. Save hinge pins for future use.

5.Close the door slowly to assure door side panel clearance and proper hinge engagement.

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is the power supply cord unplugged?

Plug into a properly grounded 3 prong outlet.

■Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Is the main or regulator gas shutoff valve in the off position?

See Installation Instructions.

Surface burners will not operate

■Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

■Is the control knob set correctly? Push in knob before turning to a setting.

■Are the burner ports clogged? See “Surface Burners” section.

Surface burner flames are uneven, yellow and/or noisy

■Are the burner ports clogged? See “Surface Burners” section.

■Are the burner caps positioned properly? See “Surface Burners” section.

■Is the air/gas mixture correct?

Contact a designated service technician to check the air/gas mixture, or see the Installation Instructions.

■Is propane gas being used?

The appliance may have been converted improperly. Contact a trained repair specialist.

Surface burner makes popping noises

■Is the burner wet? Let it dry.

Cookware not level on cooktop

■Is the range level?

Level the range. See the Installation Instructions.

■Is the proper cookware being used?

Use cookware with a flat bottom. See “Cookware” section.

Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Oven will not operate

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is this the first time the oven has been used?

Turn any one of the surface burner knobs on to release air from the gas lines.

■Is the oven temperature control knob set correctly? See “Cooktop/Oven Temperature Controls” section.

■Is the main or regulator gas shutoff in the off position? Contact a designated service technician or see the Installation Instructions.

Oven makes muffled ticking noise when in use

■This is normal and occurs when the oven burner cycles on and off to hold the set oven temperature.

W10203464A specifications

Estate W10203464A is a cutting-edge residential development designed to meet the needs of modern living. This estate is characterized by its blend of innovative technologies and sustainable features, offering residents a unique lifestyle experience.

One of the standout features of Estate W10203464A is its eco-friendly design. The development includes energy-efficient systems that reduce overall consumption. Solar panels are integrated into the architecture, harnessing renewable energy and significantly lowering electricity costs for residents. Moreover, advanced insulation materials ensure that homes maintain optimal temperature levels, reducing the need for excessive heating or cooling.

In terms of technology, the estate is equipped with smart home systems that allow residents to control lighting, security, and climate from their smartphones. The use of smart thermostats not only enhances comfort but also contributes to energy savings. High-speed internet connectivity is a standard provision, ensuring that all homes are well-equipped for telecommuting and online entertainment.

The architectural design of Estate W10203464A emphasizes open spaces and natural light. Large windows and open floor plans create an inviting atmosphere, while the use of sustainable building materials speaks to a commitment to environmental responsibility. Each unit features modern kitchens with energy-efficient appliances and spacious living areas ideal for entertaining.

Community amenities are also a highlight of this estate. Residents can enjoy access to beautifully landscaped gardens, walking trails, and recreational facilities, promoting an active and healthy lifestyle. A community clubhouse serves as a hub for social gatherings, offering spaces for events, meetings, and activities.

Safety and security are paramount at Estate W10203464A. The estate is equipped with advanced security systems, including surveillance cameras and secure access points, ensuring peace of mind for all residents.

In summary, Estate W10203464A is a remarkable example of modern living that embraces sustainability, technology, and community engagement. With its eco-friendly features, smart home technology, and a focus on creating a vibrant community, this estate is poised to redefine contemporary residential living. Whether you are a young professional, a growing family, or a retiree, Estate W10203464A offers the perfect blend of comfort, convenience, and style.