Fig. 23 |
11.Adjust the hood to the final position and attach it with all 4 screws to the ceiling (Fig. 23).
12.Connect the air outlet pipe.
13.Connect the hood to the electricity supply.
14.Pull the top duct unit up into its final position. Secure the top duct unit with 4 screws on the support frame (Fig. 24).
Note: avoid scratches when pulling the ele- ments apart by placing the assembly template, for example, over the top edge of the bottom duct to protect it.
15.Replace the glass plates with the printed side facing down. Position the glass plates at the chimney side first.
Note: when putting the glass plates in place, make sure that you do not scratch the chimney.
16.Check the appliance functions correctly.
Fig. 24 |
|
|
5750202702 | en 11.02 SK | 19 |