Gaggenau Wok manual

Page 19

1

2

First air regulation

First air regulation may be necessary to always achieve a stable and low-noise flame in the event of deviating gas types and pressures.

distance in mm

Fig. 16

3

First air regulation for outer burner (Fig. 16) After undoing the screw 2 (7 mm), move the air regulation sleeve 1 in the direction of the nozzle 3 or away from the nozzle up to a maximum distance of 12 mm until the flames burn stably and with low noise. Yellow tips must not be visible in the flames. The flame must not go off when you switch swiftly from the high to the low setting. Firmly screw in the screw 2 again.

See table on Page 12 for details of nozzle settings.

 

4

Fig. 17

Air gap

First air regulation for outer burner (Fig. 17) The throttle spring 4 is generally positioned on the hexagon shaft. If required, shift the throttle spring. For exact details, refer to the table entitled “Air gap for inner burner". The air gap must never be entirely sealed off.

19

Image 19
Contents VG 231 CA For Your SafetyFor Your Safety CAN/CSA Z240 MH CAN/CSA Z240 RV Preface Important notes For your safetyOperating for the first time About use Structure and operating principle Special accessoriesStructure Level Operating principleOff Level LowOperation Cleaning and care General Remedying slight malfunctions yourself MaintenanceTechnical data / Table Practical tips Wok and accessoriesCooking in the wok Recipes Important notes Assembly instructionsConnecting the appliance Nozzle replacement Page Page Installing the appliance Gas cooker Operating and assembly instructions