Note: Please use only the recommenced amount of dishwashing liquid whe n washing your dishes.
The detergent dispenser must be refilled before th e start o f each wash cycle. Please follow the manual instructions provided in the" Wash Cycle Table" on page 4 .
As a rule of thumb, you generally only nee d one tables poon of dishwashing detergent for a normal h ousehold wash load. For more heavily soiled items please refer to the instructions on y our dete rgent packaging. Please make sure to a dd the detergent just before starting the dishwasher.
Detergent Usage
Please follow the instruction s on the back of the detergent packaging for th e proper amount of d etergent to use for the type of load you have. The amount of detergent can vary depending on the hardnes s of your water. To determine your water consistency, please contact your local water company. Generally, th e harder the water, the more detergent you will need to use.
Button
Plea se keep dishwashing liquid out of the reach of children as it is v ery dangerous for them to consume.
To remove hard water stains, try the following s teps in this order:
Run dishes through a normal wash program.
Remove all metal dishware, such as cutlery, pans, etc., from the dishwasher.
Do not add detergent.
Pour two cups of vinegar into a bowl and set the bowl face up on the lower rack of the dishwasher.
Use only detergent specifically made for use in dishwashers. Keep your detergent fresh and dry. Please do not s tore detergent in dispenser until ready to use.
Indicator |
Dispenser cap |
Adjustable setting
To open the dispenser, turn the cap to the "open" (left) arrow and lift cap up until open.
Pour the rinse aid into the dispenser, being careful not to overfill.
Return the cap by inserting it aligned with "open"
arrow and turning it to the "closed" (right) arrow position.
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks. It also improves drying by allowing water to "sheet" off the dishes.
Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The dispenser holds about 3.4 oz (100 ml) ml of liquid rinse aid.
Be careful not to overfill the dispenser, as this can cause over sudsing of the detergent in the unit. Wipe away any spills with a damp cloth. Don't forget to replace the dispenser cap before
you close the dishwasher door.
If your household water is soft, you may not need additional rinse agents in your water as it may cause a white film around your dishes.
A measured amount of rinse aid is released during the final rinse to assist in rinsing dishes properly, keeping them residue and streak free. As with detergent, the amount of rinse aid needed for your dishes depends on the hardness of the water in your area. If you have very soft household water, you may need to dilute or omit the rinse aid.
The rinse aid dispenser is designed with four settings. Please begin your wash cycles with the dispenser set on setting 2. If spots and streaks are evident, increase the amount of rinse aid
Adjustable setting dispensed in the machine by removing the dispenser lid and rotating the dial to setting 3. If the dishes still are not drying properly or are spotted, increase the dial to setting 4.
5