Leveling the Ice Maker

Recommended grounding method

For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.

Once the ice cube machine is set in its enclosure, if the base is not level, you can adjust the feet by rotating the under block (see below) until the machine is level.

				Under block
				Turning the under block
	Turning the under block
				clockwise increases the
	counter-clockwise reduces
				machine’s height
	the machine’s height

It is important for the ice maker to be leveled, or water may not flow properly through the evaporator (ice mold). Ice production will be lower than normal, and operation will be noisy.

Adjust the height of the under block of the adjustable foot, rotating it to the right (counter- clockwise) to lower that side of the ice maker. Turning the under block to the left (clockwise) raises that side of the ice maker.

Water Supply

The water supply should be ready at the point of installation. The water supply pressure should be a minimum of 15 psig with a static pressure not more than 80 psig. (A wall outlet directly behind the ice maker will make installation easier.)

IMPORTANT:

1.All installations must be in accordance with local plumbing code requirements. Professional installation is recommended.

2.Make certain that the hoses are not pinched or kinked or damaged during installation.

3.Check for leaks after connection.

Tools required: __ open-end wrench, Phillips screwdriver

Connecting the water line:

1.Turn off main water supply.

2.Find a __ to __ vertical water pipe near the installation location. The distance should be less than 9 feet. The water supply hose provided with the ice maker is about 9 feet long.

3.A shut-off valve must be installed to the main water supply. If the water pipe has a plain piece of copper tubing, attach a __O.D. compression union to the tubing and