Franklin Industries, L.L.C FIM200 user manual Remove the ice storage bin

Page 17

2.Remove the ice storage bin

a.After removing the bottom louver, look for two screws under the slide way (see illustration). Unscrew the two screws.

b. Unscrew and remove the top panel.

c . Remove the drain hose at the back of the machine by unscrewing the hose connector.

16

Image 17

Contents Ice Cube Machine Limited Warranty ICE Maker Safety Page Technical Information Major FeaturesElectrical Connection Extension CordIntroduction Top view Back view Component LocationsCleaning before use Installing the adjustable feetUnpacking Remove packaging materialsLocation Requirements Installing the stability bracketsInstallation clearance Electrical Requirements Leveling the Ice Maker Connecting the water lineWater Supply Recommended grounding methodFinal Check List before Operation Installation TypesOperation How the machine uses water Operating MethodHow the Machine Makes Ice Preparing the Ice Cube Machine for Long Storage Cleaning and MaintenanceNormal Sounds Interior Cleaning Exterior CleaningWhat should be kept clean What shouldn’t be doneRemove the front grill Remove the ice storage bin Water Distribution Tube Cleaning Ice-Making System Cleaning Descriptions of LEDs and buttons Operating procedureClean button S. Adjust screw Ice size adjustmentPower switch Before Calling for Service TroubleshootingPage Page Franklin Industries, L.L.C Limited Warranty