Franklin Industries, L.L.C FIM200 Exterior Cleaning, Interior Cleaning, What shouldn’t be done

Page 15

Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets or there are other special considerations.

What shouldn’t be done

Never keep anything in the ice storage bin other than ice: objects like wine and beer bottles are not only unsanitary, but the labels may slip off and plug up the drain.

What should be kept clean

There are 4 things to keep clean:

1.The exterior

2.The interior

3.Water distribution tube

4.The ice-making system

Exterior Cleaning

The door and cabinet may be cleaned with a mild detergent and warm water solution such as 1 oz of dishwashing liquid mixed with 2 gallons of warm water. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting. Clean stainless steel with a cloth dampened with a mild detergent and warm water solution. Never use an abrasive cleaning agent.

Interior Cleaning

The ice storage bin should be sanitized occasionally. Clean the water tank before the ice cube machine is used for the first time and reused after stopping for an extended period of time. It is usually convenient to sanitize the trough after the ice-making system has been cleaned and the ice storage bin is empty.

1.Disconnect power to the unit.

2.Open the door. You will find the water tank screw nut on the front right of the water tank. Screw off the nut and drain water completely into the ice storage bin. The water drains out of the machine through the drain hole in the bin.

NOTE: Don’t forget to screw the nut back into place again.

3.Using a sanitizing solution made of 1 ounce of household bleach and 2 gallons of hot water (95º to 115ºF), wipe down the water tank and the inside of the ice storage bin

14

Image 15
Contents Ice Cube Machine Limited Warranty ICE Maker Safety Page Extension Cord Major FeaturesTechnical Information Electrical ConnectionIntroduction Top view Back view Component LocationsRemove packaging materials Installing the adjustable feetCleaning before use UnpackingInstalling the stability brackets Installation clearanceLocation Requirements Electrical Requirements Recommended grounding method Connecting the water lineLeveling the Ice Maker Water SupplyInstallation Types OperationFinal Check List before Operation Operating Method How the Machine Makes IceHow the machine uses water Cleaning and Maintenance Normal SoundsPreparing the Ice Cube Machine for Long Storage What shouldn’t be done Exterior CleaningInterior Cleaning What should be kept cleanRemove the front grill Remove the ice storage bin Water Distribution Tube Cleaning Ice-Making System Cleaning Descriptions of LEDs and buttons Operating procedureS. Adjust screw Ice size adjustment Power switchClean button Before Calling for Service TroubleshootingPage Page Franklin Industries, L.L.C Limited Warranty