Push the control panel cover to open it. The control panel includes one power switch, one button, one adjustable screw and four indicator lights.
Operating procedure:
1.When plugging in and turning on the power switch, the power indicator and other three indicator lights are all on.
2.After 3 minutes for water inlet, the ice machine will start to make ice automatically. Only the power and
3.During harvesting, the harvest indicator light is on and the
4.If the Clean button is pressed during the
5.When you want to clean the machine, turn off the power switch first, then turn it on again. Press the Clean button within 3 minutes and the ice maker will start the cleaning mode, with harvest and
6.If you want to interrupt the cleaning mode before it is finished, do not press the Clean button again. Instead, turn the power switch off. This stops the cleaning mode.
7.If the machine is on but only the power indicator light is lit, this may indicate that not enough water is reaching the system, that the water pump is not functioning, or some similar problem. First check the level in the water tank, then examine the water pump, etc.
8.If the unit is connected to the power supply but no visual indicator lights up when the power switch is turned on, the fuse in the control panel box may need to be replaced.
Descriptions of LEDs and buttons:
1.Ice Full (white) LED: Ice Full indicator light
When this LED is on, the ice storage bin is full of ice cubes or there is something obstructing the
2.Ice Making (Green) LED: Ice Making indicator light
When this LED is on, the unit is working in the
19