DCS DD24 manual Troubleshooting

US CA

24

Troubleshooting

Problem	Possible Cause	What to do
Unclean dishes	Wash program unsuitable	Refer to the ‘Wash program chart’ for a
	for the load.	suitable wash program, or the soils were
		too heavily baked on and dishes may need
		soaking.
	Spray arm unable to rotate.	Ensure no items are obstructing the spray
		arm path.
	DishDrawer® overloaded/	Refer to the section on loading.
	incorrectly loaded.
	Filter plate/drain filter is	Refer to the ‘User maintenance instructions’
	incorrectly inserted.	section.
	Detergent put in the wrong	Detergent must be placed in the large
	compartment.	compartment.
	Excess food not removed	Scrape all food scraps off dinnerware prior to
	from dinnerware prior to	loading.
	loading.
	Unsuitable detergent.	Use recommended brands of dishwasher
		detergent.
	Not enough detergent.	Refer to the detergent section or the
		detergent manufacturer’s instructions.
	Spray arm holes are blocked.	Clean the spray arm.
	Filter plate/drain filter is	Clean the filter plate and drain filter.
	blocked.
Foaming	Incorrect amount of	Refer to the detergent section or consult the
	detergent.	detergent manufacturer’s instructions.
	Too much egg in the wash	Increase the amount of detergent.
	load.
	Rinse agent setting too high.	Decrease the rinse agent setting.
Water leaking	Drain hose disconnected	Reconnect the drain hose to the waste pipe.
	from waste pipe.
	Water inlet hose not	Ensure the inlet hose is connected securely.
	properly connected.
	Other leaks.	Turn water and power supplies to the
		DishDrawer® off. Call your dealer or
		Authorized Service Agent.

DishDrawer® will Childlock feature is on or

not openthe Closed drawer option is on, or both.

Turn the Childlock off. Hold down the button until the light above it disappears and/or press the button to open the DishDrawer®.

Power failure	Wait until power resumes, cycle will restart in
during cycle.	same part of wash program.