DCS C-24 installation instructions Placing & Anchoring

PLACING & ANCHORING

Lift and place the wok cooktop in the opening. Be careful not to pinch the power cord or gas inlet between anything. Anchor the wok cooktop; ensure that the appliance is in place and level (See Fig.7).

For cabinets with side access, screw the 2 “L” shaped brackets (supplied) into the holes provided using the #10 sheet-metal screws as shown in Fig.7. Then using the 1/4 - 20 bolt and nuts (supplied), anchor as shown.

For cabinets with no side access, first fasten the brackets to the cabinet side wall using a suitable fastener. Then drill two 5/32” dia. holes upward into the bottom of wok cooktop and fasten as shown in Fig 7.

Side access anchoring:

Wok Cooktop

Countertop

Bottom access anchoring:

Wok Cooktop

Countertop

777fig09

Fig. 7

8