Programmer / Clock
The programmer buttons
minus plus
The ‘function’ button in the centre is used for setting the minute minder and setting up the automatic cooking. See below for details.
To set the time of day
When the power is turned on to the appliance, the time of day starts from 0.00.
Press and release the 
(minus) and 
(plus) buttons simultaneously. Set the time of day, eg 2.00 with the 
and 
buttons while the ‘dot’ beween the hours and minutes is flashing.
To select an alarm tone
Press and hold the
(minus) button to listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the 
button after the tone has sounded will automatically select that tone.
Setting the minute minder
Press and release the function button. The minute minder bell symbol will appear and flash on the display. Use the plus and minus buttons to set the required alarm time. After setting, the display will revert to show the time of day and the bell symbol will stop flashing. Pressing the function button will display the minutes remaining. If the time has counted down to the last minue, the remaining seconds are shown. The tone will sound at the end of the time set. To cancel the tone, press the function button.
18