Continental Refrigerator 20, 22 Before YOU Begin, Preparation, Tools YOU MAY Need

Page 16

Installation Instructions

Refrigerator

Models 20 and 22

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com In Canada, call 1.800.361.3400 or Visit our Website at: geappliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Refrigerator Installation 20 minutes

Water Line Installation

30minutes

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

PREPARATION

MOVING THE REFRIGERATOR INDOORS

If the refrigerator will not fit through a doorway, the refrigerator door and freezer drawer or door (depending on model) can be removed.

•To remove the refrigerator door, see Step 1 in the Reversing the Door Swing section.

•To remove the freezer drawer, see the Removing the Freezer Drawer section.

•To remove the freezer door, see Steps 2 and 3 in the Reversing the Door Swing section.

PREPARATION (cont.)

WATER SUPPLY TO THE ICEMAKER

If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at GEAppliances.com (in Canada at geappliances.ca) or from Parts and Accessories, 800.626.2002 (In Canada 1.888.261.3055).

TOOLS YOU MAY NEED

3/8″ Head Socket Driver

Adjustable Wrench(a 6-point socket is recommended)

1/4″ Outer Diameter

 

Compression Nut

 

and Ferrule (sleeve)

Phillips Head Screwdriver

(icemaker models only)

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 3828JL8012A 197D4618P002 49-6028205-03 JR Write the model and serial numbers here Model # Serial #Safety Precautions Refrigerants Before You Throw Away Your Old Refrigerator or FreezerGEAppliances.com Troubleshooting Tips Consumer SupportChanging the Temperature About the controls withTips Consumer Support Performance Air Flow SystemAbout the controls with numbered settings When to Replace the Filter Installing the Filter CartridgeAbout the water filter. on some models Water Filter CartridgeAbout the shelves and bins Rearranging the ShelvesSpillproof Shelves on some models To removeAbout the additional features SafetyAdjustable Bins on the Door Non-Adjustable Shelves on the DoorInstructions Operating Instructions Safety Instructions About the crispers and pansAbout the freezer InstructionsFreezer Shelves and Baskets Basket/Shelf RemovalIcemaker Accessory Kit Tips InstallationAbout the automatic icemaker Cleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside Preparing for Vacation Behind the RefrigeratorPreparing to Move Refrigerator Lights Replacing the light bulbsFreezer Light Preparation Before YOU BeginTools YOU MAY Need Refrigerator Location ClearancesTurn on the Water Supply Plug in the RefrigeratorAttach Refrigerator Door Handle Attach Freezer Door Handle Level the RefrigeratorSET the Controls Start the IcemakerRemove the Drawer Front from the Slides Remove the BasketRemove the Leveling Legs Replace the Freezer Basket Attach and Secure the Drawer Front to the SlidesImportant Notes Tools YOU will NeedRemove the Freezer Door Remove the Center Hinge PINRemove Center Hinge Installation Instructions Reversing the Door Swing Transfer Freezer Door StopInstall Center Hinge PIN Install Center HingeHang the Freezer Door Transfer Refrigerator Door Handle to Right Rehang Refrigerator Door Installing the Water Line Icemaker Models What YOU will NeedChoose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for the Valve Fasten the Shutoff Valve Tighten the Pipe ClampConnect the Tubing To the Valve Route the TubingBefore you call for service… Normal operating soundsInstructions Safety General Electric Company Consumer Product Ownership Registration Customer Warranty GE Will Replace What GE Will Not CoverOne Year Thirty DaysPerformance Data Sheet Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Special NoticesWater Treatment Device Schedule Service Consumer Support

22, 20 specifications

The Continental Refrigerator 20 and 22 series are sophisticated commercial refrigerator units designed to meet the rigorous demands of food service operations. Known for their reliability and robust construction, these models are ideal for restaurants, catering services, and other establishments requiring efficient temperature control and food preservation.

One of the standout features of the Continental Refrigerator 20 and 22 models is their exceptional cooling technology. These units are equipped with a powerful refrigeration system that ensures rapid cooling and consistent temperature management. With digital thermostats and automatic defrosting capabilities, they maintain optimal internal conditions, reducing the risk of temperature fluctuations that can compromise food safety.

The design of the units focuses on energy efficiency, which is critical in today’s eco-conscious market. Both the 20 and 22 models utilize high-efficiency refrigeration components and insulating materials that minimize energy expenditure without sacrificing performance. They also comply with environmental regulations, ensuring that they are a responsible choice for any business.

In terms of storage space, these models boast generous capacities suitable for various types of food products. Adjustable shelving and interior LED lighting enhance visibility and accessibility, allowing staff to locate items quickly and efficiently. The stainless steel exterior adds strength and durability, while also providing an easy-to-clean surface that resists corrosion and damage from daily use.

The user-friendly design extends to the controls as well. The digital display allows for precise temperature adjustments and enables easy monitoring of internal conditions. Additionally, the units are equipped with self-closing doors that help maintain the internal climate while offering ergonomic access for staff.

Safety features are also emphasized in the Continental Refrigerator 20 and 22 models. The door gaskets are designed to create an effective seal, preventing cold air from escaping and ensuring energy efficiency. Moreover, these refrigerators are equipped with a wide range of safety alarms to alert users in case of temperature discrepancies or door malfunctions.

Overall, the Continental Refrigerator 20 and 22 series represent a blend of functionality, reliability, and user-centric design, making them a smart investment for any commercial kitchen looking to enhance their food preservation solutions. With their advanced features and durable construction, these refrigerators stand out as a preferred choice for food service professionals.
Top Page Image Contents