Installation Instructions Be Safe Not Sorry, Rear

Installation Instructions

Be Safe - Not Sorry

Step 2: Connect to gas supply

1.The inlet to the appliance is ISO 7 - Rp 1⁄2” internal thread situated towards the top right hand rear corner.

2.Fit the bayonet connection to the wall in the shaded area as shown.

The shaded area shown is applicable to installations in minimum depth cabinets.

If more room is available, the bayonet fixing area can be extended, provided that the flexible tube does not obscure the fan intake.

60 mm
	60
	mm
Rear	60 mm
Wall	square

3.Use a 900mm - 1125mm length of flexible connector. The flexible connector shall be fitted such that it cannot come into contact with a moveable part of the housing unit (eg; drawer) and does not pass through any space susceptible of becoming congested. Make sure that the flexible connector does not block the cooling fan inlet.

4.Flexible connections should be to BS669. Parts of the appliance likely to come into contact with a flexible connector have a temperature rise less than 70°C.

5.Parts of the cooker likely to come into contact with the flexible hose have a temperature rise less than 70˚C.

6.Rigid connections must be accessible to disconnect for servicing. Cut a 150mm square hole in the right hand rear corner of the support shelf for the supply pipe.

7.Make sure all connections are gas sound.

When you are cooking, keep children away from the vicinity of the appliance.

This product is designed as a domestic cooking appliance for the preparation and cooking of domestic food products, and should not be used for any other purpose.

■Remove all packaging from the appliance before using for the first time.

●Make sure you read and understand the instructions before using the appliance.

●Keep electrical leads short so they do not drape over the appliance or the edge of the worktop.

●Keep all flammable materials (such as curtains, furnishings & clothing) away from the appliance.

●Parts of the appliance may be hot during or immediately after use. Allow sufficient time for the appliance to cool after switching off.

●Do not drape tea towels over the flue vents or doors, as this creates a fire hazard.

●Do not use aluminium foil to cover the grill pan, or put items wrapped in foil under the grill, as this creates a fire hazard.

●Never use the appliance for heating a room.

●Do not use the oven with the door inner glass panel removed (glass oven doors only).

●Always use oven gloves when removing hot food / dishes from the oven or grill. The oven / grill and utensils will be very hot when in use.

●When opening the appliance door, take care to avoid skin contact with any steam which may escape from the cooking.

●Do not use foil on oven shelves or allow it to block the oven flue, as this creates a fire hazard, and prevents heat circulation.

●When cooking heavy items - eg; turkeys - do not pull the oven shelf out with the item still on the shelf.

●Switch off the electricity supply before replacing the oven light bulb to avoid the risk of an electric shock.

All installation, servicing and maintenance work must be carried out by a competent person who will comply with current Regulations, Standards and Requirements.

Warning: This appliance must be earthed.

When you have finished cooking check that all controls are in the off position.

As with all gas appliances, it is recommended that your appliance is serviced regularly.

SO11GB, SO11GW specifications

The Creda SO11GW and SO11GB are two compact and efficient electric storage heaters designed to provide warmth and comfort in residential and commercial spaces. Both models showcase modern technology and user-friendly features that make them a popular choice for those looking to optimize their heating solutions.

One of the standout features of the Creda SO11GW and SO11GB is their advanced thermal storage system. These heaters store heat during off-peak electricity hours, making them cost-effective and energy-efficient. By utilizing lower energy tariffs, users can significantly reduce their heating bills, particularly during colder months when heating demands rise.

The Creda SO11GW, with its white finish, is designed to seamlessly blend into various interior styles, while the SO11GB, in a graphite finish, offers a sleek, contemporary alternative. Both models are compact in design, allowing for easy installation in small spaces, such as apartments or rooms where floor area is a consideration.

In terms of control and functionality, these heaters are equipped with an electronic timer and programmable controls. This technology allows users to set specific heating schedules, ensuring the space is warm when needed without unnecessary heat loss. The intuitive interface makes it easy to adjust settings and monitor energy usage, promoting user engagement with their heating solution.

Another essential characteristic of the Creda SO11GW and SO11GB is the built-in safety features. These models incorporate overheat protection and a thermal cut-out mechanism to prevent overheating, providing peace of mind for users. The heaters also feature an insulated body, ensuring that surfaces do not become dangerously hot to the touch, which is particularly important in homes with children or pets.

The heaters also come with a robust and durable construction, designed to withstand the rigors of daily use. With their long-lasting ceramic bricks, which retain and release heat evenly, the Creda SO11GW and SO11GB ensure consistent warmth throughout the heating period.

In summary, the Creda SO11GW and SO11GB are efficient, stylish electric storage heaters that combine modern aesthetics with practical technology. Their ability to deliver controlled and cost-effective heating makes them an attractive option for anyone seeking reliable warmth in their living spaces. With advanced features, user-friendly controls, and enhanced safety mechanisms, these models are well-suited to meet the diverse heating needs of today's consumers.