CARE AND CLEANING
TO CLEAN THE INSIDE OF OUTER AND INNER GLASS PANELS
Warning: Always switch your appliance OFF at the mains supply and allow to cool before cleaning.
Fig. 1
Fig. 2
Fig. 3
TWO SCREWS/
WASHERS
DOOR
DOOR OUTER FIXING GLASS &
TAG HANDLE
1. Position oven door as shown in fig. 1.
Note: The door can be wedged open using a towel between the door and the side trim thus leaving your hands free.
2.Grip inner door panel and handle/outer glass assembly. Remove two screws and fibre washers (put to one side) as shown in fig. 2.
3.Pull handle/outer glass assembly at the top outwards while still holding the inner door panel and unhook handle/outer glass assembly at the bottom by lifting handle/outer glass assembly upwards as shown in fig. 3. Take care not to dislodge rubber grommets in bottom of door.
4.Return the inner door panel to the closed position as shown in fig. 4.
Warning: Care must be taken when closing the door inner panel as the door will attempt to snatch shut without the weight of the handle/outer glass assembly. Avoid trapping your fingers.
RUBBER GROMMETS
Fig. 4
| 5. The inside of inner and outer door glass can now |
| be cleaned using a clean, damp cloth and polished |
| using a clean, dry cloth. |
| 6. Refit the handle/outer glass assembly by opening |
| the oven door and hold taking care not to trap your |
| fingers, see fig. 3. Hook the handle/outer glass |
| assembly back into the rubber grommets at the |
| bottom of the inner door panel, see fig. 3. |
| Fit the handle/outer glass assembly back in |
DOOR | position at the top ensuring the fixing tags on the |
INNER | handle/outer glass assembly fit inside the door |
PANEL | inner panel. While still holding door together, refit |
| |
| the two screws and washers, see fig. 2. |
|
|
| Never operate the ovens without the outer glass panels |
| correctly refitted. |
|
|
17