HOW to Adjust the Door Latch, HWUA6 XWUA5

Ovens	FL-2270
Rev. 10 (4/08)	Page 8 of 13

5925 Heisley Road • Mentor, OH 44060-1833

HOW TO ADJUST THE DOOR LATCH:

1.For vertical (up and down movement) adjustment:

a.Loosen (2) screws located in magnetic strike.

b.Move strike up or down for alignment to magnet on latch.

c.Tighten screws to secure

2.For horizontal (greater or lesser magnetic draw) adjustment:

a.Loosen (4) screws in door latch.

b.Move latch forward or backward to adjust magnetism.

c.Tighten screws to secure.

1.	Disconnect power cord from wall outlet.
2.	For half-size model: CO151HW Series, remove
	screws around top cover.
3.	Disconnect the yellow cord between top and bottom,
	in the back of the cabinet (see Figure 2).
4.	Lift off Hot Unit.	FIGURE 2

REPLACEMENT PARTS: Include all information on nameplate when ordering parts.

Cabinet Replacement Parts

MODEL PREFIX CO-151, RO-151

DESCRIPTION	-FPWUA (12), (18)	-FWUA (12), (18)	-FW1332	-HWUA6	-XWUA5
Hot Unit, 208V, 1 Ph	HU675013	HU675025	HU675029	HU675037	HU675037
Hot Unit, 208V, 3 Ph	HU675015	HU675027	HU675031	HU675039	HU675039
Hot Unit, 240V, 1 Ph	HU675014	HU675026	HU675030	HU675038	HU675038
Hot Unit, 240V, 3 Ph	HU675016	HU675028	HU675032	HU675040	HU675040
Door Latch Kit	1006-120-01-K	1006-120-01-K	1006-120-01-K	1006-120-01-K	1006-120-01-K
Door Strike	1006-120-02-K	1006-120-02-K	1006-120-02-K	1006-120-02-K	1006-120-02-K
Door Hinge	0519-074-K	0519-074-K	0519-074-K	0519-074-K	0519-074-K
Door Assembly	1221-525-K	1221-525-K	1221-543-K	1221-525-K	1221-545-K
Door Gasket	0861-185-K	0861-185-K	0861-184	0861-185-K	0861-250-K
Angles or Racks	0621-281-SS-K	0621-281-SS-K	1104-108	0621-281-SS-K	0621-281-SS-K
Side Handles (2),	0911-102	0911-102	0911-102	0911-102	0911-102
Black Recessed	0911-102	0911-102	0911-102	0911-102	0911-102
Black Recessed

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com