Disposal Installing the Fridge / Freezer

English

•When you open or close the door, the articles may fall and cause personal injury or material damage.

Do not store pharmaceutical products, scientific material or other temperature-sensitive products in the refrigerator .

•Products that require strict temperature controls must not be stored in the refrigerator.

Do not let a child hang from the door .

Do not touch any containers and food in the freezer with wet hands.

•It may cause frostbite.

Remove any foreign matter from the po wer plug pins.

•Otherwise, there is a risk of fire.

Do not insert your hand into the bottom area of appliance.

•Any sharp edges may cause personal injury.

After unplugging the appliance, wait for at least fiv e minutes before plugging it again to the wall socket.

•Abnormal operation of the freezer may cause material damage.

If the appliance is not be used for a long period of time, pull out the po wer plug.

•Any deterioration in the insulation may cause fire.

Do not let children touch or play with the control panel on the front of the appliance.

•Do not allow children to play with this appliance.

•Do not stand or lean on the base panel, pull-out parts, door and so on.

•Repairs and maintenance of the appliance should only be performed by a qualified technician. Incorrect repairs by an unqualified person are a potential source of danger that may have critical consequences for the user of the appliance.

•Never put ice cubes or ice lollies straight from the freezer into your mouth. (The low temperature may cause “cold burns”.)

CAUTION

The refrigerant used in fridge / freezers and the gases in the insulation material require special disposal procedures. Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.

DISPOSAL

INSTALLING THE FRIDGE / FREEZER

1.Allow an adequate space and install the fridge / freezer on a firm, level floor.

•If the appliance is not level, there may be unusual noises and poor cooling.

2.Clean the fridge / Freezer

•Wipe and clean the inside and outside of appliance with a damp cloth.

3.Plug the fridge / freezer into a wall socket used exclusively by this appliance.

•This appliance must be properly earthed.

4.Place the food in the fridge / freezer.

•It is recommended that you wait for the appliance to cool for 3~4 hours before storing food in it.

5.Keep 30cm of space between the refrigerator and the back wall.

•Insufficient space causes the noise of vibration, weakening of refrigerating power and the waste of electricity

6.The electrical plug must be accessible without moving the set.

7.For ambient temperature below 10ºC, the perfect performance of our refrigerator can not be achieved.

WARNING

Use of an earthed socket exclusively for the appliance:

• If you are using a socket with an earthed terminal, you do not require a separate earthed connection.

Use of a non-earthed socket:

•Connect the “earthed wire” to the steel plate and bury it at depth of at least 25cm in the ground.

LEVELING

If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.

1.The appliance tilts down to the left.

Turn the left adjusting leg in the direction of the arrow until the appliance is level.

2.The appliance tilts down to the right.

Turn the right adjusting leg in the direction of the arrow until the appliance is level.

PREPARING THE FRIDGE / FREEZER

To prepare your appliance for use and check that it is running correctly, take the following steps.

1.Install removed all shelves and compartments during transport in the correct positions.

2.Clean the fridge/freezer and accessories to remove any dust that accumulated during packing and shipping.

3.The interior light should be turned on when the refrigerator door’s opened.

4.Set the temperature control to the coldest temperature and let the refrigerator operate for one hour. The freezer should get slightly chilled and the motor should run smoothly with a soft hum and no noise. Your fridge / freezer is operated by a compressor which switches “on and off” to maintain the internal temperature. When the compressor is new, it requires running in for a period of up to five months. During this period, it may be slightly noisy. This is quite normal and does not represent a fault.

5.Store food once the temperature in the refrigerator is sufficiently low. It takes a few hours after starting the refrigerator to reach the proper temperature.

If the appliance does not operate correctly, check the electricity supply. If the problem persists, contact your dealer.

ERF-38.M, ERF-33.M, ERF-39.M, ERF-41.M, ERF-36.M specifications

Daewoo, a prominent name in the automotive industry, has made remarkable strides in developing a range of vehicles designed for both performance and comfort. Among its innovative offerings are the ERF-36.M, ERF-41.M, ERF-39.M, ERF-33.M, and ERF-38.M models. Each of these vehicles caters to different specifications while sharing common features that showcase the brand’s commitment to engineering excellence.

Starting with the ERF-36.M, this model is designed with a focus on fuel efficiency and maneuverability. Equipped with a 3.6-liter engine, it delivers impressive power while maintaining lower emissions. Its advanced fuel-injection system optimizes combustion, ensuring drivers enjoy reduced fuel consumption. Additionally, its compact size allows for easier navigation in urban settings, making it a favorite among city drivers.

Next, the ERF-41.M represents an upgrade with a larger 4.1-liter engine. This model emphasizes horsepower and torque, making it suitable for those requiring a bit more muscle for either hauling or towing duties. It also features enhanced safety measures, including side-impact airbags and anti-lock braking systems that provide peace of mind to drivers and passengers alike.

The ERF-39.M offers a balance between performance and comfort. This vehicle is known for its spacious interior and user-friendly technology. Outfitted with a state-of-the-art infotainment system, it ensures connectivity and entertainment no matter the journey. Luxury features such as adjustable seating and climate control make longer trips enjoyable for all occupants.

On the other hand, the ERF-33.M is engineered for versatility. It incorporates a flexible cargo space and is ideal for businesses that often shift between passenger transport and freight hauling. This dual-purpose functionality is complemented by powerful suspension systems, making it stable and secure on various terrains.

Lastly, the ERF-38.M stands out with its focus on advanced technology. Equipped with the latest in driver-assistance features, including adaptive cruise control and lane-keeping assist, it enhances safety and makes driving less stressful. Additionally, its hybrid powertrain option caters to environmentally conscious consumers, reflecting Daewoo’s dedication to sustainability.

In summary, Daewoo's ERF series—including ERF-36.M, ERF-41.M, ERF-39.M, ERF-33.M, and ERF-38.M—highlights the brand's commitment to producing reliable, innovative vehicles. Each model addresses specific needs while upholding a standard of quality that Daewoo is renowned for, making them compelling choices in today's diverse automotive market.