Installation Instructions
Move Unit to Final Position
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it. Floor damage could occur.
Leveling
1.Remove the base grille. Grasp the grille firmly an pull it toward you.
2.Using a 1/4” hex driver, turn the leveling screw on each side to raise or lower that side of the refrigerator.
NOTE
Having someone push against the top of the refrigerator takes some weight off the adjustment screws and rollers. Doing so makes it easier to turn the screws.
•To raise, turn the adjustment screw clockwise.
• To lower, turn the adjustment screw
3. Open the door again to make sure that it closes as easily as you like. If not, tilt the refrigerator slightly more to the
rear by turning both adjustments screws clockwise. It may take
several more turns, and you should turn both adjustment screws the same amount.
4. Replace the base grill.
Handle Installation
•Some units do not come with the handle installed to allow the customer to choose the handle style. Optional handle kits are also available for other models that come with the handle already installed. See the use and care manual for a list of available handle kits.
•The installation instructions for the handle are included with the kit.
Properly Dispose of Your Old Refrigerator
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous even if they sit out for “just a few days.” If you are getting rid of your old refrigerator, please follow the instructions below to help prevent accidents.
Before you throw away your old refrigerator or freezer:
•Take off the doors.
•Leave the shelves in place so
children may not easily climb inside.
7