Dacor 100500 manual Service Information, Installation Checklist

Page 16

Installation Instructions

Installation Checklist

The importance of the proper installation of your Dacor Built-In Refrigerator cannot be overemphasized. Proper installation is the responsibility of the homeowner.

IMPORTANT: To ensure a safe and proper installation, the following checklist should be competed by the installer to ensure that no part of the installation has been overlooked.

Any questions or problems with this installations should be directed to your Dacor® dealer or the Dacor® Customer Service Department at 800.793.0093 or email customerservice@ dacorworld.com. You can also visit our website at dacor.com.

Has the refrigerator been secured in place with the provided anti-tip blocking or is there a clearance of 1” (25mm) or less between the unit and a solid soffit?

Are all leveling legs extended down to make contact with the floor? Is the unit level?

Is the power cord plugged into a properly grounded dedicated 3-prong non-GFCI outlet, which had been installed in accordance with all applicable electrical codes?

Is the water supply connected? Have you checked for leaks?

Has the kickplate been installed properly?

Are all panels attached securely and properly aligned?

Have any installation/service problems been noted on the product registration card? Has the registration card been mailed?

Service Information

If you need service, be sure to have the model and serial numbers when you call. You’ll find these numbers on the serial number plate located on the light shield in the fresh food compartment.

Contact a Dacor® authorized Servicer, a Dacor® dealer, or the Dacor® Customer Service Department at 800.793.0093 or email customerservice@dacorworld.com

DANGER

To reduce risk of injury or death, follow basic precautions, including the following:

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned

refrigerators are still dangerous – even if they sit out for “just a few days.” If you are getting rid of your old refrigerator, please follow the instructions below to help prevent

accidents.

Before you throw away your old refrigerator or freezer:

• Take off the doors.

• Leave the shelves in place so children may not easily climb inside.

14

Image 16 Contents
Install ation Instructions Built-In Refriger ators Page Refrigerator Safety Table of ContentsInstallation Recommendations Product Dimensions Design SpecificationsDoor Swing Dimensions Custom Overlay Panels Side Panel Specifications Overlay Panel Specifications See Illustrations onCustom Toe Kickplate Specifications Custom Handle SpecificationsCustom Panel Door Swing Specifications Model Hole ADia Hole BDia Overall Length CDoor Stop Tools and Parts Installation SpecificationsLocation Requirements Electrical Requirements Water Supply RequirementsCold water supply Model Rough-In Width aInstallation Instructions Unpack RefrigeratorAnti-Tip Blocking Blocking the Refrigerator Water Line Connection Plug in Refrigerator Level Unit Move Unit to Final PositionInstall Custom Panels Panel InstallationPanel Installation for Dispenser Models Refer to numbered illustrations for stepsAdjust Door Hinges Side Panel Installation Anchoring the UnitService Information Installation ChecklistPage Page Page Web Site Phone 800