Danby DKC445BL manual HOW to Replace AN Empty CO2 Cylinder, Setting the Refrigerator Temperature

Page 10

HOW TO REPLACE AN EMPTY CO2 CYLINDER

1.Close the main cylinder valve (A) by turning in a clockwise direction. See Fig.13

2.Close the secondary shut-off valve (C) by turning to "horizontal" (east/west) position on lower stem pipe. See Fig.13

3.Remove the air line clamp and hose from the regulator.

4.Remove the regulator assembly (E) from empty cylinder. See Fig.13

5.Remove dust cap from new and/or replacement CO2 cylinder

6.Re-attach regulator assembly (E) to new/replacement cylinder. See Fig.13

7.Re-attach the air line hose to regulator (barb connection) and secure with clamp.

8.Slowly open main valve (A) all the way.

See Fig. 13

9.Readjust regulator pressure (D) (if necessary) between 10 ~ 12 psi/lbs.

10.Open the secondary shut-off valve (C)by turning to "vertical" (north/south) position on lower stem pipe.

D

A

FE

B

C

Fig. 13

SETTING THE REFRIGERATOR TEMPERATURE:

The temperature of the refrigerator compartment is controlled by adjusting/setting the thermostat con- trol knob, located on the ceiling of the refrigerator cabinet.

To start the refrigerator, and achieve maximum cooling quickly;

•Turn the temperature control knob (using a coin or screwdriver) clockwise to the furthest (maximum) setting on the darker blue section of the graduated control dial. See Fig. 14

•Allow the refrigerator to run at this setting for 3~4 hours.

•When maximum cooling is achieved, turn back the temperature control knob setting to the 2:00 o'clock position on the graduated blue control dial. See Fig. 15

•Correct cooling temperature is a key factor to consider in storing and dispensing draught beer.

•Optimum temperature for serving draught beer is between 34ºF ~ 38ºF.(1ºC ~ 3ºC)

•To maintain temperatures ranging between 34ºF ~ 38ºF.(1ºC ~ 3ºC) We recommend the thermostat knob be positioned at the "2:00 o'clock" setting on the graduated blue control dial.

See Fig. 15

•To turn off the refrigerator, (no cooling) rotate the control knob to the "0" position. See Fig.14

Fig. 14

Fig. 15

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DKC445BL Précaution PrecauciónTable of Contents IntroductionTips for Energy Savings Before Putting Appliance Into USEWE Care for the Environment Disposal of Worn OUT AppliancesLocation Instructions for Setting UP the Chilln Tapkeg CoolerGrounding Instructions CO2 can be Dangerous Ventilate and Leave the Room ImmediatelyChilln Tapassembly Instructions See FigsChilln Tapassembly Instructions CON’T Secondary Shut-off Valve HOW to Replace AN Empty CO2 Cylinder Setting the Refrigerator TemperatureCleaning and Maintenance Helpful Hints on Controlling TemperatureChanging the Direction of the Door Opening Swing Storage and Handling Beer TemperatureClean Beer Glasses CO2 PressureKEG Sizes Cleaning Beer LinesDispensing Beer Optional Accessories for Chill N Tapkeg Cooler Limited Product Warranty

DKC445BL specifications

The Danby DKC445BL is a versatile and stylish kegerator that brings the bar experience right to your home. Designed to hold a full-size, half-barrel keg or any variety of smaller kegs, this unit is perfect for beer enthusiasts looking to enjoy fresh draught beer without the hassle of going to a pub. The sleek black exterior adds a modern touch to any space, making it an attractive addition to your kitchen, man cave, or outdoor patio.

One of the standout features of the Danby DKC445BL is its precise temperature control. With an internal temperature range of 1°C to 4°C (34°F to 39°F), this kegerator ensures that your drinks are served at the optimal temperature, enhancing the taste and refreshing qualities of your favorite brew. The adjustable thermostat allows for fine-tuning, enabling you to accommodate various types of beer, including lagers, ales, and stouts.

The Danby DKC445BL is equipped with a powerful compressor cooling system, which ensures that your beer retains its freshness and flavor. The interior of the unit is spacious, featuring a removable wire shelf that allows for easy access and cleaning while maximizing capacity. This feature is particularly useful for those who like to host gatherings, as it provides ample storage for multiple kegs and beer-related accessories.

Moreover, the kegerator has a convenient CO2 tank storage compartment, making it easy to set up your draft system without external clutter. The unit is compatible with both 5 lb. and 20 lb. CO2 tanks, giving users the flexibility to choose the size that best suits their needs.

Durability is another key characteristic of the Danby DKC445BL. The unit is built with a robust design, featuring a heavy-duty metal exterior and a UV-protected glass door. This not only enhances the longevity of the kegerator but also protects your beer from harmful UV rays that can alter its flavor.

With its user-friendly features, such as an easy-to-read digital display and adjustable leveling legs, the Danby DKC445BL provides a hassle-free experience for beer lovers. Whether you're hosting a party or simply enjoying a night in, this kegerator makes it easy to serve perfectly chilled draught beer right from the comfort of your home. The combination of style, functionality, and performance makes the Danby DKC445BL a top choice for both casual drinkers and serious connoisseurs alike.
Top Page Image Contents