Danby DKC445BL manual Helpful Hints on Controlling Temperature, Cleaning and Maintenance

Page 11

HELPFUL HINTS ON CONTROLLING TEMPERATURE

Keep a thermometer handy. (adjust temperature control knob accordingly) Periodically monitor temperatures inside your cooler. (adjust as necessary)

Keep the refrigerator door closed as much as possible to avoid temperature fluctuations

CLEANING AND MAINTENANCE

AUTOMATIC DEFROSTING:

There is no need to defrost the refrigerator, because ice depositing on the evaporator is defrosted automat- ically. Ice build-up on the evaporator during compressor operation; will (when the compressor has cycled off) defrost automatically. Defrost water collects inside the drain trough and passes through the drain outlet in the rear wall into a drain pan situated above the compressor, where it evaporates.

CLEANING THE APPLIANCE:

Always disconnect the power cord before cleaning and/or servicing the appliance. Do not use coarse or aggressive cleaning agents as they can damage painted surfaces. Clean the exterior cabinet with warm water and a mild detergent. Clean the interior with warm water and a mild detergent, adding one or two spoonfuls of vinegar. After cleaning, connect the appliance to power supply.

SWITCH OFF AND/OR DISCONNECT THE APPLIANCE WHEN NOT IN USE:

If you do not intend to use the appliance for long periods of time, (vacations) set the thermostat knob to the "0" (off) position and disconnect the power cord. Take out all foods and clean the appliance. Leave the door slightly open to reduce mold/mildew from accumulating inside the cabinet.

CHANGING THE DIRECTION OF THE DOOR OPENING (SWING)

If you find the direction of the door swing on your appliance inconvenient, you can change it to the opposite side. Simply follow the steps listed below.

1.Lay the unit on it's back.

2.Remove the adjustable leveling leg from the lower right hinge.

3.Remove two (2) screws from the lower door hinge.

4.Open the main door and pull down, until the door releases from the upper door hinge pin.

5.Remove the plastic door plug (cap) from the top left side of the main door.

6.Re-install plastic door plug (cap) to the top right side of the main door

7.Remove (unscrew) the upper door hinge pin. (right side cabinet)

8.Re-install the upper door hinge pin. (left side cabinet)

9.Position the main door back on the cabinet and push up until the top hinge pin is inserted into the top of the door.

10.Re-install the lower door hinge to the left side of the cabinet, using the same screws removed earlier.

11.Align the main door on the cabinet before tightening the lower hinge screws.

12.Re-install the leveling leg back into the lower hinge.

13.Return the unit back to the upright position.

14.Allow the unit to stand 30 minutes before switching the unit on.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DKC445BL Precaución PrécautionIntroduction Table of ContentsDisposal of Worn OUT Appliances Before Putting Appliance Into USEWE Care for the Environment Tips for Energy SavingsGrounding Instructions Instructions for Setting UP the Chilln Tapkeg CoolerLocation Ventilate and Leave the Room Immediately CO2 can be DangerousSee Figs Chilln Tapassembly InstructionsChilln Tapassembly Instructions CON’T Secondary Shut-off Valve Setting the Refrigerator Temperature HOW to Replace AN Empty CO2 CylinderChanging the Direction of the Door Opening Swing Helpful Hints on Controlling TemperatureCleaning and Maintenance CO2 Pressure Beer TemperatureClean Beer Glasses Storage and HandlingDispensing Beer Cleaning Beer LinesKEG Sizes Optional Accessories for Chill N Tapkeg Cooler Limited Product Warranty

DKC445BL specifications

The Danby DKC445BL is a versatile and stylish kegerator that brings the bar experience right to your home. Designed to hold a full-size, half-barrel keg or any variety of smaller kegs, this unit is perfect for beer enthusiasts looking to enjoy fresh draught beer without the hassle of going to a pub. The sleek black exterior adds a modern touch to any space, making it an attractive addition to your kitchen, man cave, or outdoor patio.

One of the standout features of the Danby DKC445BL is its precise temperature control. With an internal temperature range of 1°C to 4°C (34°F to 39°F), this kegerator ensures that your drinks are served at the optimal temperature, enhancing the taste and refreshing qualities of your favorite brew. The adjustable thermostat allows for fine-tuning, enabling you to accommodate various types of beer, including lagers, ales, and stouts.

The Danby DKC445BL is equipped with a powerful compressor cooling system, which ensures that your beer retains its freshness and flavor. The interior of the unit is spacious, featuring a removable wire shelf that allows for easy access and cleaning while maximizing capacity. This feature is particularly useful for those who like to host gatherings, as it provides ample storage for multiple kegs and beer-related accessories.

Moreover, the kegerator has a convenient CO2 tank storage compartment, making it easy to set up your draft system without external clutter. The unit is compatible with both 5 lb. and 20 lb. CO2 tanks, giving users the flexibility to choose the size that best suits their needs.

Durability is another key characteristic of the Danby DKC445BL. The unit is built with a robust design, featuring a heavy-duty metal exterior and a UV-protected glass door. This not only enhances the longevity of the kegerator but also protects your beer from harmful UV rays that can alter its flavor.

With its user-friendly features, such as an easy-to-read digital display and adjustable leveling legs, the Danby DKC445BL provides a hassle-free experience for beer lovers. Whether you're hosting a party or simply enjoying a night in, this kegerator makes it easy to serve perfectly chilled draught beer right from the comfort of your home. The combination of style, functionality, and performance makes the Danby DKC445BL a top choice for both casual drinkers and serious connoisseurs alike.
Top Page Image Contents