Danby DKC445BL manual Chilln Tapassembly Instructions, See Figs

Page 7

CHILL'N TAPASSEMBLY INSTRUCTIONS:

1.Remove Worktop: Using a Phillips Screwdriver, remove the three screws located on the front underside edge of the worktop and the three screws located at the rear (back) side of the worktop.

See Fig's. 1 & 2

Remove the worktop from the cabinet and position the

worktop on top of the cabinet so that the front cornersFig. 1 are staggered across the front corners of the cabinet.

2.Installation of Top Rail: Attach the chrome rail to the work top using four self-tapping screws from the underside of the worktop through the pre-drilled holes. (attach the front ends of the rail first)

3. Re-Install Worktop: Install the front of the worktop onto the

Fig. 2

cabinet, then lower the rear side of the worktop over the

 

backside of the cabinet. Secure using the same screws

 

removed earlier. (the smaller screws at the front the larger

 

screws at the rear)

 

4. Installation of CO2 Cylinder Support: Install the cylinder

 

support onto the four studs located on the exterior back

 

wall of the cabinet. (no tools required) Align the holes in

 

the cylinder support with the studs and push down firmly.

Fig. 3

See Fig. 3

5.Installation of CO2 Cylinder: Install your " fully charged" CO2 cylinder into the support stand. IMPORTANT NOTICE:

ALWAYS EXERCISE EXTREME CAUTION WHEN HANDLING PRESSURIZED C02 CYLINDERS:

6.Installation of C02 Regulator: Attach the CO2 Regulator to

the C02 cylinder by screwing the regulator nut onto cylinder

Fig. 4

valve and tighten (snug) using an adjustable wrench.

 

7.Installation of C02 Air Line Hose to Regulator: Attach one end of the (red) air line hose to the hose barb connection on the CO2 regulator. Secure hose by using one of the two (self locking) black plastic snap on clamps provided.

(use pliers to snap the clamp tight to assure that there are no leaks)

See Fig. 5

Fig. 5

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DKC445BL Precaución PrécautionIntroduction Table of ContentsDisposal of Worn OUT Appliances Before Putting Appliance Into USEWE Care for the Environment Tips for Energy SavingsLocation Instructions for Setting UP the Chilln Tapkeg CoolerGrounding Instructions Ventilate and Leave the Room Immediately CO2 can be DangerousSee Figs Chilln Tapassembly InstructionsChilln Tapassembly Instructions CON’T Secondary Shut-off Valve Setting the Refrigerator Temperature HOW to Replace AN Empty CO2 CylinderCleaning and Maintenance Helpful Hints on Controlling TemperatureChanging the Direction of the Door Opening Swing CO2 Pressure Beer TemperatureClean Beer Glasses Storage and HandlingKEG Sizes Cleaning Beer LinesDispensing Beer Optional Accessories for Chill N Tapkeg Cooler Limited Product Warranty

DKC445BL specifications

The Danby DKC445BL is a versatile and stylish kegerator that brings the bar experience right to your home. Designed to hold a full-size, half-barrel keg or any variety of smaller kegs, this unit is perfect for beer enthusiasts looking to enjoy fresh draught beer without the hassle of going to a pub. The sleek black exterior adds a modern touch to any space, making it an attractive addition to your kitchen, man cave, or outdoor patio.

One of the standout features of the Danby DKC445BL is its precise temperature control. With an internal temperature range of 1°C to 4°C (34°F to 39°F), this kegerator ensures that your drinks are served at the optimal temperature, enhancing the taste and refreshing qualities of your favorite brew. The adjustable thermostat allows for fine-tuning, enabling you to accommodate various types of beer, including lagers, ales, and stouts.

The Danby DKC445BL is equipped with a powerful compressor cooling system, which ensures that your beer retains its freshness and flavor. The interior of the unit is spacious, featuring a removable wire shelf that allows for easy access and cleaning while maximizing capacity. This feature is particularly useful for those who like to host gatherings, as it provides ample storage for multiple kegs and beer-related accessories.

Moreover, the kegerator has a convenient CO2 tank storage compartment, making it easy to set up your draft system without external clutter. The unit is compatible with both 5 lb. and 20 lb. CO2 tanks, giving users the flexibility to choose the size that best suits their needs.

Durability is another key characteristic of the Danby DKC445BL. The unit is built with a robust design, featuring a heavy-duty metal exterior and a UV-protected glass door. This not only enhances the longevity of the kegerator but also protects your beer from harmful UV rays that can alter its flavor.

With its user-friendly features, such as an easy-to-read digital display and adjustable leveling legs, the Danby DKC445BL provides a hassle-free experience for beer lovers. Whether you're hosting a party or simply enjoying a night in, this kegerator makes it easy to serve perfectly chilled draught beer right from the comfort of your home. The combination of style, functionality, and performance makes the Danby DKC445BL a top choice for both casual drinkers and serious connoisseurs alike.
Top Page Image Contents