Danby DKC445BL manual Storage and Handling, Beer Temperature, CO2 Pressure, Tapping KEG

Page 12

HELPFUL HINTS TO ASSIST YOU IN SERVING THE PERFECT GLASS OF COLD BEER

STORAGE AND HANDLING:

Draught Beer should be treated as a food product. In most instances draught beer is not pasteurized. It is very important that you store and handle it properly.

Draught Beer should be immediately stored in a refrigerated cabinet.

Draught Beer products have a shelf life, which on "average" is 30 days after the keg is tapped. By keeping the beer keg pressurized, (with CO2) the shelf life can be extended (60 days)

Beer Kegs should be stored (refrigerated) separately from other food products. It is very important that food not be stored near or on the beer keg.

BEER TEMPERATURE:

Correct temperature is a key factor to consider in storing and dispensing draught beer.

Beer can freeze, so it is important to select and maintian proper operating temperatures inside the refrigerator cabinet.

Optimum temperatures for serving cold beer are 34º ~38º F (1º ~3º C)

Temperatures too cool or too warm may cause flavour loss, off taste and dispensing problems.

CO2 PRESSURE:

Periodically monitor the pressure regulators to ensure applied operating pressures remain constant. (10~12psi/lbs)

Always keep equipment in good repair.

TAPPING KEG:

Do not agitate kegs unnecessarily. If excessive agitation occurs (during transportation) allow keg to settle for 1 ~2 hours before tapping.

Prior to tapping the keg, ensure the beer faucet is in the off position.

Completely remove the dust cover (identification cap) from the beer keg.

Check that the keg coupler (handle) is in the up (off) position. See Fig. 9

Insert the keg coupler into the locking neck of the beer keg and apply a turn clockwise to lock into position.

Pull keg coupler handle out and downward until it locks into position. See Fig. 10

This activates both the beer and (CO2) pressure line.

The keg is now tapped and ready to draw beer.

CLEAN BEER GLASSES:

Keeping your glassware "beer clean" is the key to serving good draught beer. To achieve this:

Maintain strict sanitary conditions in the glass washing area.

Never wash glassware with utensils or dishes used to serve food. Food particles and/or residue can effect the quality/taste of draught beer.

Do not use regular liquid household dish washing detergents for glassware. They are fat-based and will leave a slight oily film on the glass. This causes beer to go flat quickly. Use a detergent designed specifically for beer glass cleaning. It must be low-suds, odor-free and non-fat.

Avoid drying glassware with towels as they tend to leave traces of lint on the surface of the glass.

We recommend that you use beer glassware only for beer. Dairy and other food products leave a residue which can effect the quality/taste of the draught.

10

Image 12
Contents DKC445BL Précaution PrecauciónTable of Contents IntroductionBefore Putting Appliance Into USE WE Care for the EnvironmentTips for Energy Savings Disposal of Worn OUT AppliancesInstructions for Setting UP the Chilln Tapkeg Cooler LocationGrounding Instructions CO2 can be Dangerous Ventilate and Leave the Room ImmediatelyChilln Tapassembly Instructions See FigsChilln Tapassembly Instructions CON’T Secondary Shut-off Valve HOW to Replace AN Empty CO2 Cylinder Setting the Refrigerator TemperatureHelpful Hints on Controlling Temperature Cleaning and MaintenanceChanging the Direction of the Door Opening Swing Beer Temperature Clean Beer GlassesStorage and Handling CO2 PressureCleaning Beer Lines KEG SizesDispensing Beer Optional Accessories for Chill N Tapkeg Cooler Limited Product Warranty

DKC445BL specifications

The Danby DKC445BL is a versatile and stylish kegerator that brings the bar experience right to your home. Designed to hold a full-size, half-barrel keg or any variety of smaller kegs, this unit is perfect for beer enthusiasts looking to enjoy fresh draught beer without the hassle of going to a pub. The sleek black exterior adds a modern touch to any space, making it an attractive addition to your kitchen, man cave, or outdoor patio.

One of the standout features of the Danby DKC445BL is its precise temperature control. With an internal temperature range of 1°C to 4°C (34°F to 39°F), this kegerator ensures that your drinks are served at the optimal temperature, enhancing the taste and refreshing qualities of your favorite brew. The adjustable thermostat allows for fine-tuning, enabling you to accommodate various types of beer, including lagers, ales, and stouts.

The Danby DKC445BL is equipped with a powerful compressor cooling system, which ensures that your beer retains its freshness and flavor. The interior of the unit is spacious, featuring a removable wire shelf that allows for easy access and cleaning while maximizing capacity. This feature is particularly useful for those who like to host gatherings, as it provides ample storage for multiple kegs and beer-related accessories.

Moreover, the kegerator has a convenient CO2 tank storage compartment, making it easy to set up your draft system without external clutter. The unit is compatible with both 5 lb. and 20 lb. CO2 tanks, giving users the flexibility to choose the size that best suits their needs.

Durability is another key characteristic of the Danby DKC445BL. The unit is built with a robust design, featuring a heavy-duty metal exterior and a UV-protected glass door. This not only enhances the longevity of the kegerator but also protects your beer from harmful UV rays that can alter its flavor.

With its user-friendly features, such as an easy-to-read digital display and adjustable leveling legs, the Danby DKC445BL provides a hassle-free experience for beer lovers. Whether you're hosting a party or simply enjoying a night in, this kegerator makes it easy to serve perfectly chilled draught beer right from the comfort of your home. The combination of style, functionality, and performance makes the Danby DKC445BL a top choice for both casual drinkers and serious connoisseurs alike.