Dometic RM 7390 (L) installation instructions Draught-free installation, Proposal

Page 20

6.2Draught-free installation

The refrigerator must be sealed in accordance with EN 1949.

Illustrated below are two typical approved methods of sealing.

Do NOT use any easily inflammable materials (in particular silicone sealing agent or similar) for sealing! The device manufacturer's product liability and guarantee shall lapse if such materials are used.

Proposal 1:

Using the Installation Sealing Kit from Dometic (SP.No. 241 2559-00, available from Dometic)

Insert lipped seals (A) into the installation recesses at the bottom and at each side.

Insert deflector plate (B), fitted with a lipped seal

(A) of heavy-duty, nonflammable material, into the installation recess (see Fig. 1).

Insert deflector plate (B) in such a way that the hot air escapes through the air vent grating into the open air.

Affix the discharge plate to the caravan wall, not to the refrigerator!

In addition, discharge plate (B) with its lipped seal

(A) must seal the refrigerator off from the living area (see Fig. 1).

Ensure that the refrigerator is installed level in the recess.

Fig.1

Proposal 2:

Another option is to provide the refrigerator with a cowl (A). The cowl (A) should ideally be affixed to the caravan wall, not to the refrigerator. Insert sealing strips at the bottom and sides of the cover.

Finally, push the refrigerator into the cover from the front.

Both of these installation options facilitate the remo- val and installation of the appliance for servicing.

Comment:

Other methods of sealing may be approved. However the chosen method must prevent draughts entering the living space of the caravan or motorhome. Failure to seal correctly will allow warm air to collect around the refrigera tor and its performance will be affected. If the cavity between the caravan wall and the refrigerator is sealed so that fumes cannot penetrate the living area it is possible to vent the flue gas directly through the upper grille without using the aluminium flue pipe. For this installation method, it is recommended that the same air vent grille should be used at the top and at the bottom (L200), and that the T-piece of the flue pipe is turned 45 degrees.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operating Instructions Safety instructions Table of Contents Introduction CoolantWarranty and Customer Service CleaningUsing the refrigerator ControlsMains power Electrical operationGas operation 12V DCManual Ignition with Piezo igniter Manual Ignition with battery igniterTemperature setting cooling compartment Exchange of the igniter’s battery General advicesStoring food Freezer compartmentPositioning the storage rack Making ice cubesDefrosting Switching off Door lockingInterior light when fitted Winter operationChanging the decor panel Changing the doorhang Troubleshooting Failure The refrigerator does not work onMaintenance Product liabilityEnvironmental hints DisposalTechnical data Declaration of conformityInstallation Side installationRear installation Side installation with floor-roof ventilationDraught-free installation ProposalVentilation and air extraction Installing the ventilation system 100 200Installation recess Securing the refrigeratorFume extraction Fitting the fume flue in the upper ventilation grilleGas installation Separate fume extractionGas pressure Battery connection Electrical installationPower line connection Wiring diagrams Wiring diagram with manual ignition and no interior lightPage Dometic GmbH Der Steinwiese Siegen

RM 7390 (L) specifications

The Dometic RM 7390 (L) is a high-performance absorption refrigerator designed specifically for recreational vehicles and mobile applications. With a spacious capacity and reliable features, this refrigerator is an essential appliance for those who enjoy life on the road.

One of the standout features of the Dometic RM 7390 (L) is its generous storage capacity, which allows users to store a considerable amount of food and beverages. The interior is designed for optimal space utilization, with adjustable shelves and door bins that accommodate various sizes of items. This flexibility makes it easy to organize your supplies and ensure that everything is easily accessible.

The technology behind the Dometic RM 7390 (L) incorporates advanced absorption cooling. The refrigerator operates efficiently, using either propane gas or electricity, which means it can easily adapt to different power sources depending on availability. This dual-power capability is a major advantage for RV users, as it ensures that the fridge can remain operational even in remote locations without electrical hookups.

Another important characteristic of the Dometic RM 7390 (L) is its user-friendly design. The refrigerator features a straightforward control panel that allows users to switch between power sources effortlessly and adjust the temperature settings according to their needs. The design is also aesthetically pleasing, blending seamlessly with modern RV interiors.

Energy efficiency is a key consideration in the design of the Dometic RM 7390 (L). The appliance is engineered to consume minimal power while providing reliable cooling performance. This is particularly important for RV owners who are mindful of their energy consumption when living off-grid.

Built to withstand the rigors of travel, the Dometic RM 7390 (L) is constructed from high-quality materials and includes features such as a sturdy door closure and robust hinges. This ensures that the refrigerator remains durable, even when subjected to the vibrations and movements associated with life on the road.

Overall, the Dometic RM 7390 (L) stands out as a reliable and efficient refrigerator solution for RV enthusiasts. Its combination of ample storage space, versatile power options, user-friendly design, and energy efficiency make it an ideal choice for those looking to enhance their mobile living experience. Whether for a weekend getaway or an extended road trip, the Dometic RM 7390 (L) is sure to meet the needs of any traveler.
Top Page Image Contents