Dometic Comprehensive Guide to Ignition and Temperature Settings for Refrigerators

1. Manual Ignition with "Piezo igniter"

1.Open the valve of the gas cylinder.

2.Open the shut-off valve to the gas supply.

3. Set energy selector switch (A) to

A

5. Activate Piezo

Cignition (C)

several times at intervals 1-2 seconds.

4.Press and hold rotary switch (B)

B

6.Check the inspection glass to see whether there is a flame (the inspection glass is insi- de the refrigerator at the bottom left).

2. Manual Ignition with "battery igniter"

3.Set energy selector switch (A)to

5.Activate ignition

Cby pressing the button (C) and

keep it depressed.

4.Press and hold rotary switch (B)

B

6.Once the flame has been ignited and is burning, the needle of the galvanometer passes over into the green section.

7.Release igniter button (C). Keep rotary switch (B) depressed for another 10-15 seconds, then release.

8.Check the flame indicator to see whether a flame is burning.

9.Repeat the entire process if the flame has gone out.

10.Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.

5.2.4Temperature setting cooling compartment

B

middle position

As shown, you are able to regulate the temperature of the cooling compartment, if necessary, by turning rotary knob (B)

The cooling unit’s performance is influenced by ambient temperatures.

At ambient temperatures of +15°C up to +25°C, set the knob B to the TIP middle position. The cooling unit works with optimal performance.

8