Dometic RM 7390 (L) installation instructions Ventilation and air extraction

Page 21

In this case, for gas operation, do not use the upper winter cover!

If even with draught-free installation a fume chimney is desirable, you must incorporte the L100 ventilation and extraction system into the upper air vent opening.

Installation of fume chimney: please refer to point 6.7.

Deviations shall require the consent of the manufacturer.

6.3Ventilation and air extraction

A correct installation is important for correct operation of the appliance to ensure, there is no a build-up of heat at the back of the appliance; this heat must be allowed to escape into the open air.

In the event of high ambient temperatures, full performance of the cooling unit can only be achieved by means of adequate ventilation and extraction.

Ventilation is provided for the unit by means of two apertures in the caravan wall. Fresh air enters at the bottom, extracts the heat and exits through the upper vent grille.

The upper ventilation grille should be positioned as high as possible above condenser (A).

The lower ventilation grille should be flush with the floor of the vehicle, allowing any gas leakages (hea- vier than air) to escape directly into the open air.

If such an arrangement is not possible a hole must be provided under the refrigerator (not close to the bur- ner) so that any leaking LP gas can escape. This must have an effictive area of at least 13cm². It is desirable to fit the hole with wire mesh or similar, and an angle plate to protect it from stones, mud etc., the wire mesh must not reduce the effective area of 13cm² ( EN 1949).

The ventilation grilles must have an open cross- section of at least 250 cm². This is reached using the Dometic Absorber Ventilation and Air Extraction System L100 / L 200 that has been tested and approved for this purpose.

Comment:

If the distance between the wall and the refrigerator is greater than 20 mm the gap can be reduced to 20 mm by fitting a suitable baffle piece.

15-20mm

13cm²

Correct mounting of the lower ventilation grille facilitates the access to the electrical and gas connections during maintenance work.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operating Instructions Safety instructions Table of Contents Coolant IntroductionCleaning Warranty and Customer ServiceControls Using the refrigeratorElectrical operation Mains powerGas operation 12V DCManual Ignition with battery igniter Temperature setting cooling compartmentManual Ignition with Piezo igniter General advices Exchange of the igniter’s batteryStoring food Freezer compartmentMaking ice cubes DefrostingPositioning the storage rack Door locking Switching offWinter operation Interior light when fittedChanging the decor panel Changing the doorhang Failure The refrigerator does not work on TroubleshootingProduct liability MaintenanceEnvironmental hints DisposalDeclaration of conformity Technical dataSide installation InstallationSide installation with floor-roof ventilation Rear installationProposal Draught-free installationVentilation and air extraction 100 200 Installing the ventilation systemSecuring the refrigerator Installation recessFitting the fume flue in the upper ventilation grille Fume extractionSeparate fume extraction Gas installationGas pressure Electrical installation Power line connectionBattery connection Wiring diagram with manual ignition and no interior light Wiring diagramsPage Dometic GmbH Der Steinwiese Siegen

RM 7390 (L) specifications

The Dometic RM 7390 (L) is a high-performance absorption refrigerator designed specifically for recreational vehicles and mobile applications. With a spacious capacity and reliable features, this refrigerator is an essential appliance for those who enjoy life on the road.

One of the standout features of the Dometic RM 7390 (L) is its generous storage capacity, which allows users to store a considerable amount of food and beverages. The interior is designed for optimal space utilization, with adjustable shelves and door bins that accommodate various sizes of items. This flexibility makes it easy to organize your supplies and ensure that everything is easily accessible.

The technology behind the Dometic RM 7390 (L) incorporates advanced absorption cooling. The refrigerator operates efficiently, using either propane gas or electricity, which means it can easily adapt to different power sources depending on availability. This dual-power capability is a major advantage for RV users, as it ensures that the fridge can remain operational even in remote locations without electrical hookups.

Another important characteristic of the Dometic RM 7390 (L) is its user-friendly design. The refrigerator features a straightforward control panel that allows users to switch between power sources effortlessly and adjust the temperature settings according to their needs. The design is also aesthetically pleasing, blending seamlessly with modern RV interiors.

Energy efficiency is a key consideration in the design of the Dometic RM 7390 (L). The appliance is engineered to consume minimal power while providing reliable cooling performance. This is particularly important for RV owners who are mindful of their energy consumption when living off-grid.

Built to withstand the rigors of travel, the Dometic RM 7390 (L) is constructed from high-quality materials and includes features such as a sturdy door closure and robust hinges. This ensures that the refrigerator remains durable, even when subjected to the vibrations and movements associated with life on the road.

Overall, the Dometic RM 7390 (L) stands out as a reliable and efficient refrigerator solution for RV enthusiasts. Its combination of ample storage space, versatile power options, user-friendly design, and energy efficiency make it an ideal choice for those looking to enhance their mobile living experience. Whether for a weekend getaway or an extended road trip, the Dometic RM 7390 (L) is sure to meet the needs of any traveler.
Top Page Image Contents