Whirlpool RE953PXKT0 warranty LIFT-UP Cooktop, Replacing

REPLACING

1.Be sure surface unit controls are OFF.

tptacle

1.

While

pushing the surface unit terminal into

the

receptacle,

lift a little

on

the

edge

of

the unit nearest the receptacle.

i.

When

the

terminal

is

pushed

into

the

re-

ceptacle

as

far as

it will

go,

the

surface

unit

2. Line up opening

in the reflector bowl

with

will fit into the reflector bowl.

the surface unit

receptacle

Reflector bowls reflect heat back to the

utensils on the surface units. They also help

Termrnol

catch spills. When they are kept clean, they

reflect heat better and look new longer.

If a

reflector

bowl

gets

discolored,

some

of the utensils used may not be flat enough.

Or some may be too large for the surface

unit. In either case, some of the heat that is

meant to go into or around a utensil goes

down and heats the reflector bowl. This ex-

tra heaf

can

discolor

it.

3.Hold the surface unit as level as possible

with the terminal just started into the receptacle.

LIFT-UP COOKTOP

1.Be sure surface units,cooktop and oven

are COOL. Lift the front of the cooktop at the center and swing the support rod up.

DO NOT let the cooktop bump

DO NOT drop the cooktop.

2.Carefully lower the cooktop onto the support rod. Be sure the tip of the rod fits in the notch in the cooktop.

3.Wipe with warm soapy water. Use soapy steel wool pad on stubborn spots.

the upper oven when lifting, Damage can result.

12