ADDITIONAL SAFETY INSTRUCTIONS
FOR GRINDERS
1.KEEP HANDS AWAY FROM ROTATING PARTS. Never attempt to adjust or stop a tool which has been mounted on the grinder shaft when the tool is turning.
2.HOLD THE TOOL FIRMLY. Always brace yourself against the rotational force of the turning shaft to avoid slipping the tool and possibly caus- ing cuts or abrasions.
3.NEVER USE WATER OR OTHER LUBRICANTS with the grinding tools in this kit. Moisture greatly increases the risk of a shock haz- ard.
4.WATCH OUT FOR FLYING SPARKS. Hold the tool so that any sparks created will fly in the oppo- site direction from you or other flam- mable materials.
5.DO NOT TOUCH THE WORK- PIECE IMMEDIATELY AFTER OPERATION. The workpiece sur- face will be hot from the grinding process and may burn your skin.
6.BEFORE APPLYING ONE OF THE ACCESSORY TOOL HEADS TO THE WORKPIECE, run the tool freely for a minute or two and check to be sure there is no wobble or excessive vibration.
7.ONLY USE GRINDING WHEELS which have been rated for an oper- ating speed which is equal to or greater than the highest speed of this tool.
8.WHEN USING GRINDING WHEELS, always check the wheel for cracks or other damage. Never use a wheel with signs of damage as it could fly apart during the grind- ing process and cause injury.
9.ALWAYS UNPLUG THE TOOL WHEN NOT IN USE.
Operating this equipment has the potential to propel debris into the air which can cause eye injury. Always wear safety glasses or goggles when operating equipment. Be certain the safety glasses you wear meet the appropriate standards of the
American National Standards Institute (ANSI).
G8601 Mini Grinder Kit |
