Whirlpool RE953PXKT0 Baking or Roasting in Either Oven, Adjusting the Oven Temperature Control

BAKING OR ROASTING IN EITHER OVEN

Put the rack(s) where you want them before turning on

		the oven.
Rack(s)	should	be	placed
so food	can be	centered		in
the oven. Always leave at
least II/Z to 2 inches			(4-5	cm)
between the sides of the pan
and the oven walls and pans.
For more	information,		see	the
Lift rack at front and pull out.	“Cooking		Guide.”

2

Set the Oven Selector on BAKE.

5

34

Set the	Oven	Temperature	Let the	oven	preheat	until the
Control	to the	baking	Signal	Light	goes off.
temperature		you want.
6		f	7

Put food in the oven. Oven

rock, walls and door will be hot.

During baking, the elements will turn on and off to help keep the oven temperature

at the setting. The Signal Light will turn on and off with the elements,

The top element helps heat during baking, but does not turn red.

When baking is done, turn

. both knobs to OFF.

ADJUSTING THE OVEN TEMPERATURE CONTROL

Does your new oven seem to be hotter or colder than your old oven at the

same settings? The temperature setting in your old oven may have changed gradually overthe years. The accurate setting of your new oven can seem differ-

If you think the oven temperature needs adjusting, follow these steps:

1. PUII the	Oven	2. Loosen	the lock-
Temperature		ing screw;
Control	straight	NOTICE	position
Off.		of notches.

3.To lower the tern- perature, move black part of knob closer to LO. Each notch equals about 10°F (5°C).

4.To raise the tem- perature, move black part of knob closer to HI. Each notch equals about 10°F (5°C).

Tighten the locking screw. Replace the knob.