Whirlpool lSF014BEW manual Using your range, Using the Surface Burners, Surface Burner Indicators

Page 7

Using your range

RIGHT REAR

CONTROL KNOB

Using the Surface Burners

These ranges are equipped with electronic ignitors. Electronic ignitors automatically light the burners each time they are used.

y Surface Burner Indicators

The solid dot in the surface burner indicator shows which surface burner is turned on by that knob.

Control knobs must be pushed In, then turned to LITEposition.

Atter the burner lights, turn the control knob back to a desired setting.The control knob can be set anywhere between HI and a low setting. Do not cook wlth the control In the LITE posltlon.

l

l

l

l

Burn, Fire and Exploslon Hazard Burner flame should not extend beyond lhe edge of the cooklng utensil. The flame can burn you and cause poor cooking results. Be sure all control knobs are turned to OFF when you are not cooklng. Someone could be burned or a the could start It a burner Is accidentally letl ON. If the flame should go out while cooklng, or If there Is a strong gas odor, turn the burners OFF. Walt tlve mlnutes for the gas odor to disappear, before rellghtlng burner. It gas odor Is still present, see safety note on page 3. Fallure to follow these precautions could result In exploslon or tire.

Do not attempt to light the oven burner during a power tallure. Personal InJury could result.

continued on next page

Image 7
Contents ?ff GAS--~ Before you use your range ContentsSafety Instructions Pan Save Theseinstructions Model lSF014BEW Parts and featuresUsing the Surface Burners Using your rangeSurface Burner Indicators Using the Minute Timer Caseof a Prolonged Power FailureBaking Using the Oven ControlBroiling Oven Vent Control Panels Caring for your rangeLift-Up Cooktop Surface Burner GratesSurface Burners Standard Oven CleaningOven Door Part Cleaning ChartOven door Before calling for Assistance If you need service or assistancePage Page Range Product