Surface Burners
I | TYPICAL TOP BURNERFLAME |
|
Lift up the cooktop, following the instructions on page 13.
Wipe off surface burners with warm soapy water and a soft cloth after each use.
Occasionally check surface burner flames for size and shape as shown. If flames do not burn properly, you may need to remove the surface burners for cleaning (see page15) or call a qualified technician for burner adjustments.
The Oven Door
Removing the oven door will make it easier to clean the oven.
Burn and Electrlcal Shock Hazard
Make sure all controls are OFF and the oven Is cool before removing oven door. Fallure to do so can result In burns or electrlcal shock.
1. Open the door to the first stop position.
2.Hold the door at both sides and lift off of hinges at bottom corners of door.
3.lo replace, fit the bottom corners of the door over the ends of the hinges.
Push the door down evenly. The door will close only when it is on the hinges correctly.
Standard Oven Cleaning
The Standard Oven has to be hand cleaned. Use warm soapy water and steel wool pads or a commercial oven cleaner. See “Cleaning Chart” for further instructions.