Whirlpool ETl8GK Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

REFRIGERATOR CONTROL	I	/ ‘A	I
	POWER SAVING CONTROL	LIGHT SWITCH	FREEZER CONTROL

Setting the controls...

Controls forthe refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...

REFRIGERATOR

1.Set the REFRIGERA- TOR CONTROL to 3..

2.Set the FREEZER CONTROL to B.

Give the refrigerator time to cool down com- pletely before adding food. [This may take sev- eral hours.)

These settings should be about right for nor- mal household refrigerator usage.

The controls will be set about right when milk or juice is as cold as you like when ice cream is firm.

Changing the control settings...

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.

l

l

l

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments. Then adjust the Freezer Control if needed.

		CONDITION:
		If Refrigerator
		Section	is
		TOO WARM
		If Freezer
		Section	is
		TOO WARM
QUE$TIONS?
...call	your	If Refrigerator
COOL-LINE ’		Section	is
service		TOO COLD
assistance		If ICE isn’t
telephone
		MADE	FAST ENOUGH
number
(page	15 I.

REASON:								RECOMMENDED
								CONTROL SETTINGS:
Door	opened			often				Refrigerator
Large	amount			of food			added	Freezer
Room	temperature					too	warm
Door	opened			often				Refrigerator
Large	amount			of food			added	Freezer
Very	cold		room		temperature
[can’t	cycle			often		enough)
Controls		not		set	correctly			Refrigerator
for your		conditions						Freezer
Heavy		ice	usage					Refrigerator
Very	cold		room		temperature			Freezer
(can’t	cycle			often		enough]

If BOTH SECTIONS	Door	opened	often
are TOO WARM	Large	amount	of food added
	Very warm or very cold
	room	temperatures

Refrigerator Freezer

Power Saving Control...

The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the “CONSUMES LESS ENERGY” setting when humidity is low.

2.Use the “REDUCESEXTERIOR MOISTURE” setting if moisture forms on the outside of the refrigerator.